How much does a pressure washing cost in Salt Lake City?

A pressure washing in Salt Lake City typically costs $137-$913, 9% below the $400 national average.

What is the cost per sq ft for a pressure washing in Salt Lake City?

Pressure Washing in Salt Lake City typically costs $0-$0 per sq ft.

What are the different quality tiers for a pressure washing in Salt Lake City?

A budget pressure washing in Salt Lake City averages $136 (Single surface: driveway or deck only (400-500 sq ft)). A mid-range project runs $363 (Whole house exterior + driveway, standard 2,000 sq ft home). A premium renovation costs $870 (Full property: house, driveway, deck, fence, sidewalks + soft wash on siding).

How long does a pressure washing take?

A pressure washing typically takes 2-4 hours. The minimum timeline is 1 hour, and complex projects can run 1 day (full property).

Can I DIY a pressure washing?

DIY feasibility for a pressure washing is rated High for concrete / Moderate for house exterior.

Cost to Pressure Washing in Salt Lake City, UT (2026)

If you’re budgeting a pressure washing in Salt Lake City, most projects run $137-$913, 9% below the $400 national average. What moves that number most is usually one thing: Surface Type and Size. On its own it can swing the cost by $75-$500, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Bundle surfaces in one visit - the second and third surfaces often cost only $50-$100 more than the first; pricing drops steeply when the truck is already there

In the Mountain West (where Salt Lake City sits): Near national average. Less humidity means less mold issues but more mineral deposits and hard water staining.

$137-$913 in Salt Lake City

9% below the national average · 0.91x cost multiplier

Homeowners in Salt Lake City typically spend $137-$913 on a pressure washing, about 9% below the national average. Labor rates and contractor availability in the Mountain West region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Salt Lake City

Line Item	Low	Mid	High
Cost per sq ft	$0	$0	$0
Materials	$0	$0	$52
Labor	$136	$363	$818
Permits	$0	$0	$0
Total	$136-9% vs. national avg	$363-9% vs. national avg	$870-8% vs. national avg

Budget

Single surface: driveway or deck only (400-500 sq ft)

Mid-Range

Whole house exterior + driveway, standard 2,000 sq ft home

Premium

Full property: house, driveway, deck, fence, sidewalks + soft wash on siding

Material Options

Material prices below are national averages; availability in Salt Lake City may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Standard Pressure Wash (2,000-3,000 PSI)	$0.15-$0.35/sq ft	Effective on concrete, brick, stone, and pavers	Too aggressive for wood, vinyl, or painted surfaces	Driveways, sidewalks, concrete patios, brickEffective on concrete, brick, stone, and pavers
Soft Wash (Low Pressure + Solution)	$0.25-$0.50/sq ft	Safe for siding, roofs, wood, stucco; kills algae and mold at root	Higher cost, slower process	House exterior siding (all types), roofs, painted surfaces, woodSafe for siding, roofs, wood, stucco; kills algae and mold at root
Surface Cleaning Attachment (Flat Work)	$0.10-$0.20/sq ft	Faster than wand-only for large flat areas, more even result	Leaves circular marks if operator not experienced	Large driveways and concrete patios - faster and more even than a wandFaster than wand-only for large flat areas, more even result
Chemical Pre-Treatment (Degreasers, Algaecides)	$0.05-$0.15/sq ft materials	Breaks down oil, mold, and algae before rinsing - much better result	Small additional cost and dwell time	Oil-stained driveways, mold-covered siding, heavily soiled surfacesBreaks down oil, mold, and algae before rinsing - much better result
Hot Water Pressure Washing	$0.30-$0.60/sq ft	Most effective on grease and oil, commercial-grade cleaning	Equipment is expensive, fewer contractors have it	Commercial kitchens, heavy machinery, extreme grease stainsMost effective on grease and oil, commercial-grade cleaning

Other Projects in Salt Lake City

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Pressure Washing

Salt Lake City Estimate

Typical Range

$137-$913

vs. National Average

9% below national

Cost Multiplier

0.91x

Cost Per sq ft

$0-$0

This 0.91x estimate prices Salt Lake City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →