Cost to Pressure Washing in Memphis, TN

$123–$820 in Memphis

18% below the national average · 0.82x cost multiplier

Expect to pay $123–$820 for a pressure washing in Memphis, about 18% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Memphis prices.

Cost Breakdown in Memphis

Line Item	Low	Mid	High
Cost per sq ft	$0	$0	$0
Materials	$0	$0	$41
Labor	$123	$328	$738
Permits	$0	$0	$0
Total	$123-18% vs. national avg	$328-18% vs. national avg	$779-18% vs. national avg

Budget

Single surface: driveway or deck only (400-500 sq ft)

Mid-Range

Whole house exterior + driveway, standard 2,000 sq ft home

Premium

Full property: house, driveway, deck, fence, sidewalks + soft wash on siding

Material Options

Material prices below are national averages; availability in Memphis may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Standard Pressure Wash (2,000-3,000 PSI)	$0.15-$0.35/sq ft	Effective on concrete, brick, stone, and pavers	Too aggressive for wood, vinyl, or painted surfaces	Driveways, sidewalks, concrete patios, brickEffective on concrete, brick, stone, and pavers
Soft Wash (Low Pressure + Solution)	$0.25-$0.50/sq ft	Safe for siding, roofs, wood, stucco; kills algae and mold at root	Higher cost, slower process	House exterior siding (all types), roofs, painted surfaces, woodSafe for siding, roofs, wood, stucco; kills algae and mold at root
Surface Cleaning Attachment (Flat Work)	$0.10-$0.20/sq ft	Faster than wand-only for large flat areas, more even result	Leaves circular marks if operator not experienced	Large driveways and concrete patios - faster and more even than a wandFaster than wand-only for large flat areas, more even result
Chemical Pre-Treatment (Degreasers, Algaecides)	$0.05-$0.15/sq ft materials	Breaks down oil, mold, and algae before rinsing - much better result	Small additional cost and dwell time	Oil-stained driveways, mold-covered siding, heavily soiled surfacesBreaks down oil, mold, and algae before rinsing - much better result
Hot Water Pressure Washing	$0.30-$0.60/sq ft	Most effective on grease and oil, commercial-grade cleaning	Equipment is expensive, fewer contractors have it	Commercial kitchens, heavy machinery, extreme grease stainsMost effective on grease and oil, commercial-grade cleaning

Other Projects in Memphis

Full Kitchen Remodel

Full Bathroom Remodel

Roof Replacement (Asphalt Shingles)

Back to national average for Pressure Washing

Memphis Estimate

Typical Range

$123–$820

vs. National Average

18% below national

Cost Multiplier

0.82x

Cost Per sq ft

$0–$0

Estimates apply Memphis's 0.82x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →