How much does a pressure washing cost in Los Angeles?

A pressure washing in Los Angeles typically costs $173-$1,151, 15% above the $400 national average.

What is the cost per sq ft for a pressure washing in Los Angeles?

Pressure Washing in Los Angeles typically costs $0-$1 per sq ft.

What are the different quality tiers for a pressure washing in Los Angeles?

A budget pressure washing in Los Angeles averages $173 (Single surface: driveway or deck only (400-500 sq ft)). A mid-range project runs $460 (Whole house exterior + driveway, standard 2,000 sq ft home). A premium renovation costs $1,095 (Full property: house, driveway, deck, fence, sidewalks + soft wash on siding).

How long does a pressure washing take?

A pressure washing typically takes 2-4 hours. The minimum timeline is 1 hour, and complex projects can run 1 day (full property).

Can I DIY a pressure washing?

DIY feasibility for a pressure washing is rated High for concrete / Moderate for house exterior.

Cost to Pressure Washing in Los Angeles, CA (2026)

If you’re budgeting a pressure washing in Los Angeles, most projects run $173-$1,151, 15% above the $400 national average. What moves that number most is usually one thing: Surface Type and Size. On its own it can swing the cost by $75-$500, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Bundle surfaces in one visit - the second and third surfaces often cost only $50-$100 more than the first; pricing drops steeply when the truck is already there

In the West Coast (where Los Angeles sits): CA water use restrictions affect technique and chemical choices. High labor rates, especially Bay Area.

$173-$1,151 in Los Angeles

15% above the national average · 1.15x cost multiplier

In Los Angeles, a pressure washing runs $173 to $1,151 on average - about 15% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Los Angeles

Line Item	Low	Mid	High
Cost per sq ft	$0	$0	$1
Materials	$0	$0	$59
Labor	$173	$460	$1,036
Permits	$0	$0	$0
Total	$173+15% vs. national avg	$460+15% vs. national avg	$1,095+15% vs. national avg

Budget

Single surface: driveway or deck only (400-500 sq ft)

Mid-Range

Whole house exterior + driveway, standard 2,000 sq ft home

Premium

Full property: house, driveway, deck, fence, sidewalks + soft wash on siding

Material Options

Material prices below are national averages; availability in Los Angeles may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Standard Pressure Wash (2,000-3,000 PSI)	$0.15-$0.35/sq ft	Effective on concrete, brick, stone, and pavers	Too aggressive for wood, vinyl, or painted surfaces	Driveways, sidewalks, concrete patios, brickEffective on concrete, brick, stone, and pavers
Soft Wash (Low Pressure + Solution)	$0.25-$0.50/sq ft	Safe for siding, roofs, wood, stucco; kills algae and mold at root	Higher cost, slower process	House exterior siding (all types), roofs, painted surfaces, woodSafe for siding, roofs, wood, stucco; kills algae and mold at root
Surface Cleaning Attachment (Flat Work)	$0.10-$0.20/sq ft	Faster than wand-only for large flat areas, more even result	Leaves circular marks if operator not experienced	Large driveways and concrete patios - faster and more even than a wandFaster than wand-only for large flat areas, more even result
Chemical Pre-Treatment (Degreasers, Algaecides)	$0.05-$0.15/sq ft materials	Breaks down oil, mold, and algae before rinsing - much better result	Small additional cost and dwell time	Oil-stained driveways, mold-covered siding, heavily soiled surfacesBreaks down oil, mold, and algae before rinsing - much better result
Hot Water Pressure Washing	$0.30-$0.60/sq ft	Most effective on grease and oil, commercial-grade cleaning	Equipment is expensive, fewer contractors have it	Commercial kitchens, heavy machinery, extreme grease stainsMost effective on grease and oil, commercial-grade cleaning

Other Projects in Los Angeles

Full Kitchen Remodel

Full Bathroom Remodel

Solar Panel Installation

Back to national average for Pressure Washing

Los Angeles Estimate

Typical Range

$173-$1,151

vs. National Average

15% above national

Cost Multiplier

1.15x

Cost Per sq ft

$0-$1

This 1.15x estimate prices Los Angeles labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →