How much does a pressure washing cost in Jacksonville?

A pressure washing in Jacksonville typically costs $127-$844, 16% below the $400 national average.

What is the cost per sq ft for a pressure washing in Jacksonville?

Pressure Washing in Jacksonville typically costs $0-$0 per sq ft.

What are the different quality tiers for a pressure washing in Jacksonville?

A budget pressure washing in Jacksonville averages $126 (Single surface: driveway or deck only (400-500 sq ft)). A mid-range project runs $336 (Whole house exterior + driveway, standard 2,000 sq ft home). A premium renovation costs $804 (Full property: house, driveway, deck, fence, sidewalks + soft wash on siding).

How long does a pressure washing take?

A pressure washing typically takes 2-4 hours. The minimum timeline is 1 hour, and complex projects can run 1 day (full property).

Can I DIY a pressure washing?

DIY feasibility for a pressure washing is rated High for concrete / Moderate for house exterior.

Cost to Pressure Washing in Jacksonville, FL (2026)

If you’re budgeting a pressure washing in Jacksonville, most projects run $127-$844, 16% below the $400 national average. What moves that number most is usually one thing: Surface Type and Size. On its own it can swing the cost by $75-$500, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Bundle surfaces in one visit - the second and third surfaces often cost only $50-$100 more than the first; pricing drops steeply when the truck is already there

In the Southeast (where Jacksonville sits): High demand due to humidity and mold growth; very competitive market with good pricing. Year-round work season keeps rates lower.

$127-$844 in Jacksonville

16% below the national average · 0.84x cost multiplier

In Jacksonville, a pressure washing runs $127 to $844 on average - about 16% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Jacksonville

Line Item	Low	Mid	High
Cost per sq ft	$0	$0	$0
Materials	$0	$0	$48
Labor	$126	$336	$756
Permits	$0	$0	$0
Total	$126-16% vs. national avg	$336-16% vs. national avg	$804-15% vs. national avg

Budget

Single surface: driveway or deck only (400-500 sq ft)

Mid-Range

Whole house exterior + driveway, standard 2,000 sq ft home

Premium

Full property: house, driveway, deck, fence, sidewalks + soft wash on siding

Material Options

Material prices below are national averages; availability in Jacksonville may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Standard Pressure Wash (2,000-3,000 PSI)	$0.15-$0.35/sq ft	Effective on concrete, brick, stone, and pavers	Too aggressive for wood, vinyl, or painted surfaces	Driveways, sidewalks, concrete patios, brickEffective on concrete, brick, stone, and pavers
Soft Wash (Low Pressure + Solution)	$0.25-$0.50/sq ft	Safe for siding, roofs, wood, stucco; kills algae and mold at root	Higher cost, slower process	House exterior siding (all types), roofs, painted surfaces, woodSafe for siding, roofs, wood, stucco; kills algae and mold at root
Surface Cleaning Attachment (Flat Work)	$0.10-$0.20/sq ft	Faster than wand-only for large flat areas, more even result	Leaves circular marks if operator not experienced	Large driveways and concrete patios - faster and more even than a wandFaster than wand-only for large flat areas, more even result
Chemical Pre-Treatment (Degreasers, Algaecides)	$0.05-$0.15/sq ft materials	Breaks down oil, mold, and algae before rinsing - much better result	Small additional cost and dwell time	Oil-stained driveways, mold-covered siding, heavily soiled surfacesBreaks down oil, mold, and algae before rinsing - much better result
Hot Water Pressure Washing	$0.30-$0.60/sq ft	Most effective on grease and oil, commercial-grade cleaning	Equipment is expensive, fewer contractors have it	Commercial kitchens, heavy machinery, extreme grease stainsMost effective on grease and oil, commercial-grade cleaning

Other Projects in Jacksonville

Roof Replacement (Asphalt Shingles)

Heat Pump Installation

Full Bathroom Remodel

Back to national average for Pressure Washing

Jacksonville Estimate

Typical Range

$127-$844

vs. National Average

16% below national

Cost Multiplier

0.84x

Cost Per sq ft

$0-$0

This 0.84x estimate prices Jacksonville labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →