Cost to Pressure Washing in Albuquerque, NM (2026)

If you’re budgeting a pressure washing in Albuquerque, most projects run $128-$853, 15% below the $400 national average. What moves that number most is usually one thing: Surface Type and Size. On its own it can swing the cost by $75-$500, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Bundle surfaces in one visit - the second and third surfaces often cost only $50-$100 more than the first; pricing drops steeply when the truck is already there

In the Southwest (where Albuquerque sits): Near national average. Less humidity means less mold issues but more mineral deposits and hard water staining.

$128-$853 in Albuquerque

15% below the national average · 0.85x cost multiplier

Expect to pay $128-$853 for a pressure washing in Albuquerque, about 15% below the national benchmark. The Southwest region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Albuquerque prices.

Cost Breakdown in Albuquerque

Line ItemLowMidHigh
Cost per sq ft$0$0$0
Materials$0$0$48
Labor$127$340$765
Permits$0$0$0
Total$127-15% vs. national avg$340-15% vs. national avg$813-14% vs. national avg

Budget

Single surface: driveway or deck only (400-500 sq ft)

Mid-Range

Whole house exterior + driveway, standard 2,000 sq ft home

Premium

Full property: house, driveway, deck, fence, sidewalks + soft wash on siding

Material Options

Material prices below are national averages; availability in Albuquerque may shift costs slightly.

MaterialCost/UnitBest For
Standard Pressure Wash (2,000-3,000 PSI)$0.15-$0.35/sq ftDriveways, sidewalks, concrete patios, brickEffective on concrete, brick, stone, and pavers
Soft Wash (Low Pressure + Solution)$0.25-$0.50/sq ftHouse exterior siding (all types), roofs, painted surfaces, woodSafe for siding, roofs, wood, stucco; kills algae and mold at root
Surface Cleaning Attachment (Flat Work)$0.10-$0.20/sq ftLarge driveways and concrete patios - faster and more even than a wandFaster than wand-only for large flat areas, more even result
Chemical Pre-Treatment (Degreasers, Algaecides)$0.05-$0.15/sq ft materialsOil-stained driveways, mold-covered siding, heavily soiled surfacesBreaks down oil, mold, and algae before rinsing - much better result
Hot Water Pressure Washing$0.30-$0.60/sq ftCommercial kitchens, heavy machinery, extreme grease stainsMost effective on grease and oil, commercial-grade cleaning

Other Projects in Albuquerque

Albuquerque Estimate

Typical Range

$128-$853

vs. National Average

15% below national

Cost Multiplier

0.85x

Cost Per sq ft

$0-$0

This 0.85x estimate prices Albuquerque labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →