Cost to Paver Patio Installation in St. Louis, MO (2026)
If you’re budgeting a paver patio installation in St. Louis, most projects run $2,439-$7,114, 2% above the $4,500 national average. What moves that number most is usually one thing: Paver Material Choice. On its own it can swing the cost by $1,000 - $5,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Choose standard concrete pavers over natural stone to save $5-$15 per square foot without sacrificing durability
In the Midwest (where St. Louis sits): Lower labor rates and good availability of concrete paver suppliers. Clay soils may require extra base depth, adding slightly to material costs.
$2,439-$7,114 in St. Louis
2% above the national average · 1.02x cost multiplier
In St. Louis, a paver patio installation runs $2,439 to $7,114 on average - about 2% above what homeowners pay nationwide. The Midwest market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in St. Louis
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $8 | $15 | $25 |
| Materials | $1,128 | $2,068 | $3,760 |
| Labor | $1,228 | $2,344 | $3,572 |
| Permits | $0 | $0 | $0 |
| Total | $2,356+2% vs. national avg | $4,600+2% vs. national avg | $8,084+1% vs. national avg |
Budget
Standard concrete pavers in a basic running bond pattern, 300 sq ft patio, compacted gravel base, polymeric sand joints
Mid-Range
Premium interlocking pavers, herringbone or basketweave pattern, 300 sq ft patio, soldier course border, 6-inch gravel base
Premium
Natural stone or porcelain pavers, custom pattern with inlays, 300 sq ft patio, professional design, mortar-set with concrete slab base
Material Options
Material prices below are national averages; availability in St. Louis may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Standard Concrete Pavers | $8-$12 per sq ft installed | Most homeowners wanting a durable, attractive patio at a reasonable priceMost affordable, wide color and shape selection, easy to replace individual pavers, strong and durable |
| Premium Interlocking Pavers | $12-$18 per sq ft installed | Homeowners wanting a high-end look without the cost of natural stoneExcellent color retention, tighter interlocking system, tumbled or textured options look like natural stone |
| Bluestone | $18-$30 per sq ft installed | Traditional or colonial style homes, front entry patios, upscale outdoor living spacesClassic, elegant appearance, extremely durable, naturally slip-resistant, increases home value |
| Travertine | $15-$25 per sq ft installed | Pool decks, southern climates, Mediterranean or Spanish style homesStays cool underfoot, elegant Mediterranean look, naturally non-slip, pairs beautifully with pool areas |
| Porcelain Pavers | $15-$22 per sq ft installed | Modern and contemporary homes, low-maintenance outdoor spaces, climates with freeze-thaw cyclesVirtually no maintenance, fade-proof, stain-proof, consistent appearance, frost-resistant |
Other Projects in St. Louis
St. Louis Estimate
Typical Range
$2,439-$7,114
vs. National Average
2% above national
Cost Multiplier
1.02x
Cost Per sq ft
$8-$25
This 1.02x estimate prices St. Louis labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →