Cost to Paver Patio Installation in Phoenix, AZ

$2,280–$6,650 in Phoenix

5% below the national average · 0.95x cost multiplier

In Phoenix, a paver patio installation runs $2,280 to $6,650 on average — about 5% below what homeowners pay nationwide. The Mountain West market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Phoenix

Line Item	Low	Mid	High
Cost per sq ft	$8	$14	$24
Materials	$1,140	$2,090	$3,800
Labor	$1,045	$1,995	$3,040
Permits	$0	$0	$0
Total	$2,185-5% vs. national avg	$4,275-5% vs. national avg	$7,600-5% vs. national avg

Budget

Standard concrete pavers in a basic running bond pattern, 300 sq ft patio, compacted gravel base, polymeric sand joints

Mid-Range

Premium interlocking pavers, herringbone or basketweave pattern, 300 sq ft patio, soldier course border, 6-inch gravel base

Premium

Natural stone or porcelain pavers, custom pattern with inlays, 300 sq ft patio, professional design, mortar-set with concrete slab base

Material Options

Material prices below are national averages; availability in Phoenix may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Standard Concrete Pavers	$8-$12 per sq ft installed	Most affordable, wide color and shape selection, easy to replace individual pavers, strong and durable	Can fade over time, less unique than natural stone, cheaper options may chip at edges	Most homeowners wanting a durable, attractive patio at a reasonable priceMost affordable, wide color and shape selection, easy to replace individual pavers, strong and durable
Premium Interlocking Pavers	$12-$18 per sq ft installed	Excellent color retention, tighter interlocking system, tumbled or textured options look like natural stone	Higher cost than standard concrete, some proprietary patterns limit future replacement options	Homeowners wanting a high-end look without the cost of natural stoneExcellent color retention, tighter interlocking system, tumbled or textured options look like natural stone
Bluestone	$18-$30 per sq ft installed	Classic, elegant appearance, extremely durable, naturally slip-resistant, increases home value	Expensive, uneven thickness requires skilled installation, can be slippery when polished, limited color range	Traditional or colonial style homes, front entry patios, upscale outdoor living spacesClassic, elegant appearance, extremely durable, naturally slip-resistant, increases home value
Travertine	$15-$25 per sq ft installed	Stays cool underfoot, elegant Mediterranean look, naturally non-slip, pairs beautifully with pool areas	Porous and needs sealing, can crack in freeze-thaw climates, acid-sensitive (no vinegar cleaners)	Pool decks, southern climates, Mediterranean or Spanish style homesStays cool underfoot, elegant Mediterranean look, naturally non-slip, pairs beautifully with pool areas
Porcelain Pavers	$15-$22 per sq ft installed	Virtually no maintenance, fade-proof, stain-proof, consistent appearance, frost-resistant	More expensive, can be slippery when wet unless textured, harder to cut on-site, newer product with less track record	Modern and contemporary homes, low-maintenance outdoor spaces, climates with freeze-thaw cyclesVirtually no maintenance, fade-proof, stain-proof, consistent appearance, frost-resistant

Other Projects in Phoenix

Full Kitchen Remodel

Full Bathroom Remodel

Central AC Installation

Back to national average for Paver Patio Installation

Phoenix Estimate

Typical Range

$2,280–$6,650

vs. National Average

5% below national

Cost Multiplier

0.95x

Cost Per sq ft

$8–$24

Estimates apply Phoenix's 0.95x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →