How much does a landscaping design and installation cost in Cleveland?

A landscaping design and installation in Cleveland typically costs $1,460-$17,515, 3% below the $6,500 national average.

What is the cost per sq ft for a landscaping design and installation in Cleveland?

Landscaping Design and Installation in Cleveland typically costs $4-$24 per sq ft.

What are the different quality tiers for a landscaping design and installation in Cleveland?

A budget landscaping design and installation in Cleveland averages $1,764 (Basic refresh: mulch, shrub planting, sod in bare patches, clean edging). A mid-range project runs $7,011 (Full front yard redesign: new plant beds, sod or seed, defined edging, basic irrigation). A premium renovation costs $24,795 (Professional full redesign: hardscape, mature trees, irrigation system, lighting, drainage).

How long does a landscaping design and installation take?

A landscaping design and installation typically takes 3-7 days. The minimum timeline is 1 day, and complex projects can run 3-4 weeks (full design + install).

Can I DIY a landscaping design and installation?

DIY feasibility for a landscaping design and installation is rated High for simple work / Low for design-heavy projects.

Cost to Landscaping Design and Installation in Cleveland, OH (2026)

If you’re budgeting a landscaping design and installation in Cleveland, most projects run $1,460-$17,515, 3% below the $6,500 national average. What moves that number most is usually one thing: Project Scope. On its own it can swing the cost by $1,000-$40,000, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Plant small and let it grow - a 1-gallon shrub costs $8-$15 and reaches the same size as a 5-gallon ($35-$60) in 2-3 years with proper care

In the Midwest (where Cleveland sits): Competitive landscaping market; shorter season concentrates work into spring and summer. Chicago near average, smaller cities well below.

$1,460-$17,515 in Cleveland

3% below the national average · 0.97x cost multiplier

Homeowners in Cleveland typically spend $1,460-$17,515 on a landscaping design and installation, about 3% below the national average. Labor rates and contractor availability in the Midwest region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Cleveland

Line Item	Low	Mid	High
Cost per sq ft	$4	$10	$24
Materials	$744	$2,790	$9,300
Labor	$1,020	$3,570	$12,240
Permits	$0	$186	$465
Total	$1,764-2% vs. national avg	$7,011-3% vs. national avg	$24,795-3% vs. national avg

Budget

Basic refresh: mulch, shrub planting, sod in bare patches, clean edging

Mid-Range

Full front yard redesign: new plant beds, sod or seed, defined edging, basic irrigation

Premium

Professional full redesign: hardscape, mature trees, irrigation system, lighting, drainage

Material Options

Material prices below are national averages; availability in Cleveland may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Sod (Instant Lawn)	$0.60-$1.20/sq ft materials	Immediate results, no waiting period, firm surface in days	Expensive, requires intensive watering for 4-6 weeks, limited grass types	Front yards where curb appeal matters immediately, small to medium areasImmediate results, no waiting period, firm surface in days
Seed (Grow-In Lawn)	$0.05-$0.20/sq ft materials	Lowest cost, wider grass variety selection, good long-term density	Takes 6-12 weeks to establish, requires precise timing, weed competition	Large back yards, budget-conscious projects, spring/fall timingLowest cost, wider grass variety selection, good long-term density
Hardwood Mulch	$35-$50/cubic yard installed	Suppresses weeds, retains moisture, improves soil, low maintenance	Breaks down over 1-2 years and needs refreshing, can harbor pests if piled against house	All plant beds - the most cost-effective landscaping improvement per dollarSuppresses weeds, retains moisture, improves soil, low maintenance
Native and Drought-Tolerant Plants	$10-$80/plant installed	Low water needs, minimal maintenance, supports local wildlife, lower long-term cost	Less visual impact in first year, limited selection in some regions	Eco-conscious homeowners, dry climates, low-maintenance landscapesLow water needs, minimal maintenance, supports local wildlife, lower long-term cost
Landscape Edging (Steel or Aluminum)	$1.50-$4/linear ft installed	Defines beds cleanly, prevents grass intrusion, professional look	Metal can rust or shift over time, requires periodic re-setting	Any project - clean edging is one of the most cost-effective ways to elevate a landscapeDefines beds cleanly, prevents grass intrusion, professional look

Other Projects in Cleveland

Full Kitchen Remodel

Basement Finishing

Roof Replacement (Asphalt Shingles)

Back to national average for Landscaping Design and Installation

Cleveland Estimate

Typical Range

$1,460-$17,515

vs. National Average

3% below national

Cost Multiplier

0.97x

Cost Per sq ft

$4-$24

This 0.97x estimate prices Cleveland labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →