Cost to Gutter Installation and Replacement in Raleigh, NC (2026)
If you’re budgeting a gutter installation and replacement in Raleigh, most projects run $924-$3,235, 8% below the $2,000 national average. What moves that number most is usually one thing: Gutter Material. On its own it can swing the cost by $300 - $3,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Schedule gutter installation in winter or early spring when contractors have less work and may discount 10-20%
In the Southeast (where Raleigh sits): Year-round installation weather and lower labor rates keep costs below average. Heavy rainfall in FL and GA means gutters are essential.
$924-$3,235 in Raleigh
8% below the national average · 0.92x cost multiplier
Homeowners in Raleigh typically spend $924-$3,235 on a gutter installation and replacement, about 8% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Raleigh
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per linear ft | $4 | $9 | $28 |
| Materials | $428 | $713 | $1,710 |
| Labor | $402 | $805 | $1,252 |
| Permits | $0 | $0 | $0 |
| Total | $830-8% vs. national avg | $1,518-8% vs. national avg | $3,152-7% vs. national avg |
Budget
5-inch aluminum sectional gutters with vinyl downspouts, basic hangers, standard white or brown finish for 150 linear feet
Mid-Range
5-inch seamless aluminum gutters, aluminum downspouts, hidden hangers every 24 inches, leaf screens for 150 linear feet
Premium
6-inch seamless copper or zinc gutters, half-round profile, decorative hangers, premium gutter guards for 150 linear feet
Material Options
Material prices below are national averages; availability in Raleigh may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Aluminum (Seamless) | $6-$12 per linear ft installed | Most homeowners - best balance of cost, durability, and appearanceRust-proof, lightweight, custom-fit with no seams, 25+ color options |
| Aluminum (Sectional) | $3-$6 per linear ft installed | DIY projects, rental properties, or very tight budgetsCheapest option, available at hardware stores, DIY-friendly |
| Steel | $8-$14 per linear ft installed | Northern climates with heavy snow and ice, areas with large treesVery strong, handles heavy ice and snow loads, resists denting |
| Copper | $18-$30 per linear ft installed | Historic homes, high-end properties, homeowners who want a forever gutter50-75 year lifespan, beautiful patina, adds curb appeal and home value |
| Zinc | $15-$25 per linear ft installed | Coastal properties or areas with acid rain, architecturally distinctive homesSelf-healing surface resists corrosion, 50+ year lifespan, eco-friendly |
Other Projects in Raleigh
Raleigh Estimate
Typical Range
$924-$3,235
vs. National Average
8% below national
Cost Multiplier
0.92x
Cost Per linear ft
$4-$28
This 0.92x estimate prices Raleigh labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →