Cost to Gutter Installation and Replacement in Dallas, TX (2026)
If you’re budgeting a gutter installation and replacement in Dallas, most projects run $913-$3,196, 9% below the $2,000 national average. What moves that number most is usually one thing: Gutter Material. On its own it can swing the cost by $300 - $3,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Schedule gutter installation in winter or early spring when contractors have less work and may discount 10-20%
In the Southeast (where Dallas sits): Year-round installation weather and lower labor rates keep costs below average. Heavy rainfall in FL and GA means gutters are essential.
$913-$3,196 in Dallas
9% below the national average · 0.91x cost multiplier
In Dallas, a gutter installation and replacement runs $913 to $3,196 on average - about 9% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Dallas
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per linear ft | $4 | $9 | $27 |
| Materials | $434 | $724 | $1,737 |
| Labor | $384 | $768 | $1,194 |
| Permits | $0 | $0 | $0 |
| Total | $818-9% vs. national avg | $1,492-10% vs. national avg | $3,124-8% vs. national avg |
Budget
5-inch aluminum sectional gutters with vinyl downspouts, basic hangers, standard white or brown finish for 150 linear feet
Mid-Range
5-inch seamless aluminum gutters, aluminum downspouts, hidden hangers every 24 inches, leaf screens for 150 linear feet
Premium
6-inch seamless copper or zinc gutters, half-round profile, decorative hangers, premium gutter guards for 150 linear feet
Material Options
Material prices below are national averages; availability in Dallas may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Aluminum (Seamless) | $6-$12 per linear ft installed | Most homeowners - best balance of cost, durability, and appearanceRust-proof, lightweight, custom-fit with no seams, 25+ color options |
| Aluminum (Sectional) | $3-$6 per linear ft installed | DIY projects, rental properties, or very tight budgetsCheapest option, available at hardware stores, DIY-friendly |
| Steel | $8-$14 per linear ft installed | Northern climates with heavy snow and ice, areas with large treesVery strong, handles heavy ice and snow loads, resists denting |
| Copper | $18-$30 per linear ft installed | Historic homes, high-end properties, homeowners who want a forever gutter50-75 year lifespan, beautiful patina, adds curb appeal and home value |
| Zinc | $15-$25 per linear ft installed | Coastal properties or areas with acid rain, architecturally distinctive homesSelf-healing surface resists corrosion, 50+ year lifespan, eco-friendly |
Other Projects in Dallas
Dallas Estimate
Typical Range
$913-$3,196
vs. National Average
9% below national
Cost Multiplier
0.91x
Cost Per linear ft
$4-$27
This 0.91x estimate prices Dallas labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →