Cost to Gutter Guard Installation in Salt Lake City, UT (2026)
If you’re budgeting a gutter guard installation in Salt Lake City, most projects run $883-$2,943, 2% below the $1,800 national average. What moves that number most is usually one thing: Guard Type & Material. On its own it can swing the cost by $2 - $15/linear ft, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Choose micro-mesh over reverse-curve systems - save $4-$8/linear ft with comparable debris protection
In the Mountain West (where Salt Lake City sits): Moderate costs, ice dam considerations.
$883-$2,943 in Salt Lake City
2% below the national average · 0.98x cost multiplier
Homeowners in Salt Lake City typically spend $883-$2,943 on a gutter guard installation, about 2% below the national average. Labor rates and contractor availability in the Mountain West region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Salt Lake City
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per linear ft | $5 | $10 | $18 |
| Materials | $260 | $728 | $1,560 |
| Labor | $273 | $636 | $908 |
| Permits | $0 | $0 | $0 |
| Total | $533-3% vs. national avg | $1,364-3% vs. national avg | $2,468-1% vs. national avg |
Budget
Basic mesh or foam gutter guards for 150 linear feet, snap-on installation
Mid-Range
Micro-mesh or perforated aluminum guards for 150 linear feet, professionally installed with gutter cleaning
Premium
Premium stainless steel micro-mesh or reverse-curve systems for 150 linear feet, with gutter repair and lifetime warranty
Material Options
Material prices below are national averages; availability in Salt Lake City may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Foam Inserts | $2-$4/linear ft | Budget temporary solution, DIY installationCheapest option, easy DIY install, fits most gutters |
| Screen/Mesh Guards | $3-$6/linear ft | Areas with mainly leaf debris, moderate budgetsAffordable, easy to install and remove, blocks large debris |
| Micro-Mesh Guards | $6-$12/linear ft | Best overall performance, pine tree areas, long-term solutionBlocks virtually all debris including pine needles and shingle grit, durable, long-lasting |
| Reverse-Curve (Helmet) | $10-$18/linear ft | Heavy rainfall areas, homeowners wanting minimal maintenanceVery durable, handles heavy water flow, no visible screen from ground |
Other Projects in Salt Lake City
Salt Lake City Estimate
Typical Range
$883-$2,943
vs. National Average
2% below national
Cost Multiplier
0.98x
Cost Per linear ft
$5-$18
This 0.98x estimate prices Salt Lake City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →