Cost to Gutter Cleaning in Seattle, WA (2026)
If you’re budgeting a gutter cleaning in Seattle, most projects run $126-$378, 26% above the $175 national average. What moves that number most is usually one thing: Home Stories and Roof Height. On its own it can swing the cost by $50 - $200, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Schedule cleaning in late fall after leaves have dropped completely - one thorough fall cleaning is more efficient than two partial ones
In the West Coast (where Seattle sits): Bay Area and Seattle add 25-35%; LA runs 20-25% above average.
$126-$378 in Seattle
26% above the national average · 1.26x cost multiplier
In Seattle, a gutter cleaning runs $126 to $378 on average - about 26% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Seattle
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per linear ft | $1 | $2 | $4 |
| Materials | $0 | $0 | $0 |
| Labor | $139 | $252 | $630 |
| Permits | $0 | $0 | $0 |
| Total | $139+26% vs. national avg | $252+26% vs. national avg | $630+26% vs. national avg |
Budget
Single-story home, 100-150 linear ft, light debris.
Mid-Range
Two-story home, 150-200 linear ft, moderate debris, downspout flush.
Premium
Large two-story or complex roofline, heavy debris/moss, downspout snaking, gutter inspection included.
Material Options
Material prices below are national averages; availability in Seattle may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Basic Cleaning Only | $70-$150 typical | Single-story homes, light debris, annual spring maintenanceLowest cost, fast service, removes debris by hand or blower |
| Cleaning + Downspout Flush | $125-$250 typical | Most homeowners - the standard service for fall and spring cleaningsConfirms downspouts are clear and flowing, most popular service tier |
| Full Service (Clean, Flush, Inspect) | $175-$400 typical | Homes over 15 years old, after severe storms, or before a home saleIdentifies loose hangers, failing seams, and minor damage before it becomes a leak |
| Gutter Brightening / Exterior Polish | $75-$200 add-on | Pre-sale cleanups, homes with visible tiger-stripe staining on guttersRemoves black streaking and oxidation from gutter exteriors, improves curb appeal |
| Gutter Guard Installation (Preventive) | $4-$12 per linear ft | Homes under heavy tree cover where annual cleaning is a recurring expenseReduces cleaning frequency to once every few years, protects against clogs |
Other Projects in Seattle
Seattle Estimate
Typical Range
$126-$378
vs. National Average
26% above national
Cost Multiplier
1.26x
Cost Per linear ft
$1-$4
This 1.26x estimate prices Seattle labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →