Cost to Fence Repair in Jacksonville, FL

$273–$1,092 in Jacksonville

9% below the national average · 0.91x cost multiplier

In Jacksonville, a fence repair runs $273 to $1,092 on average — about 9% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Jacksonville

Line Item	Low	Mid	High
Cost per linear ft	$68	$23	$3185
Materials	$109	$364	$910
Labor	$182	$592	$1,638
Permits	$0	$0	$137
Total	$291-9% vs. national avg	$956-9% vs. national avg	$2,685-9% vs. national avg

Budget

Replace 3-5 pickets, reset a leaning post, patch minor damage.

Mid-Range

Replace 20-30 linear ft of fence, 2-3 posts, matching boards.

Premium

Major repair after storm, 50+ linear ft, multiple post replacements, gate hardware.

Material Options

Material prices below are national averages; availability in Jacksonville may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Pressure-Treated Wood Boards	$1.50-$4 per linear ft	Cheapest option, widely available, easy to cut and nail on-site	Needs sealing or staining every 2-3 years, will gray and crack without maintenance	Budget repairs, matching existing PT pine fencesCheapest option, widely available, easy to cut and nail on-site
Cedar Pickets	$3-$7 per linear ft	Naturally rot-resistant, holds stain well, longer lifespan than PT pine	More expensive than PT pine, harder to match if existing fence has weathered	Upgrading a section while blending with an existing cedar fenceNaturally rot-resistant, holds stain well, longer lifespan than PT pine
Vinyl Fence Sections	$10-$25 per linear ft	No painting or staining needed, resists rot and insects, low long-term maintenance	Can crack in extreme cold, panel sections must match existing profile exactly	Repairing existing vinyl fences where matching panels are availableNo painting or staining needed, resists rot and insects, low long-term maintenance
Aluminum Fence Panels	$15-$35 per linear ft	Rust-free, powder-coat finish is durable, good for ornamental styles	Limited style matching, more expensive than wood for basic privacy fences	Decorative and ornamental fence repairs, pool fencingRust-free, powder-coat finish is durable, good for ornamental styles
Wrought Iron Repair (Welding)	$75-$200 per repair point	Structural and long-lasting when done right, maintains the look of ornamental iron	Requires a certified welder, not a DIY option, expensive per repair point	Historic or high-end properties with wrought iron fencingStructural and long-lasting when done right, maintains the look of ornamental iron

Other Projects in Jacksonville

Roof Replacement (Asphalt Shingles)

Full Bathroom Remodel

Back to national average for Fence Repair

Jacksonville Estimate

Typical Range

$273–$1,092

vs. National Average

9% below national

Cost Multiplier

0.91x

Cost Per linear ft

$68–$3185

Estimates apply Jacksonville's 0.91x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →