How much does a fence repair cost in Denver?

A fence repair in Denver typically costs $306-$1,225, 2% above the $650 national average.

What is the cost per linear ft for a fence repair in Denver?

Fence Repair in Denver typically costs $77-$3573 per linear ft.

What are the different quality tiers for a fence repair in Denver?

A budget fence repair in Denver averages $326 (Replace 3-5 pickets, reset a leaning post, patch minor damage.). A mid-range project runs $1,071 (Replace 20-30 linear ft of fence, 2-3 posts, matching boards.). A premium renovation costs $3,012 (Major repair after storm, 50+ linear ft, multiple post replacements, gate hardware.).

How long does a fence repair take?

A fence repair typically takes 1-3 days. The minimum timeline is 1 day, and complex projects can run 1 week.

Can I DIY a fence repair?

DIY feasibility for a fence repair is rated Yes.

Cost to Fence Repair in Denver, CO (2026)

If you’re budgeting a fence repair in Denver, most projects run $306-$1,225, 2% above the $650 national average. What moves that number most is usually one thing: Fence Material. On its own it can swing the cost by $75 - $2,500, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Replace only the damaged pickets or boards rather than entire fence sections - a few boards at $2-$4 each beats a full panel replacement at $15-$25 per linear foot

In the Mountain West (where Denver sits): Denver and Salt Lake City near or above national average; rural areas lower.

$306-$1,225 in Denver

2% above the national average · 1.02x cost multiplier

Expect to pay $306-$1,225 for a fence repair in Denver, about 2% above the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Denver prices.

Cost Breakdown in Denver

Line Item	Low	Mid	High
Cost per linear ft	$77	$26	$3573
Materials	$127	$424	$1,060
Labor	$199	$647	$1,793
Permits	$0	$0	$159
Total	$326+2% vs. national avg	$1,071+2% vs. national avg	$3,012+2% vs. national avg

Budget

Replace 3-5 pickets, reset a leaning post, patch minor damage.

Mid-Range

Replace 20-30 linear ft of fence, 2-3 posts, matching boards.

Premium

Major repair after storm, 50+ linear ft, multiple post replacements, gate hardware.

Material Options

Material prices below are national averages; availability in Denver may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Pressure-Treated Wood Boards	$1.50-$4 per linear ft	Cheapest option, widely available, easy to cut and nail on-site	Needs sealing or staining every 2-3 years, will gray and crack without maintenance	Budget repairs, matching existing PT pine fencesCheapest option, widely available, easy to cut and nail on-site
Cedar Pickets	$3-$7 per linear ft	Naturally rot-resistant, holds stain well, longer lifespan than PT pine	More expensive than PT pine, harder to match if existing fence has weathered	Upgrading a section while blending with an existing cedar fenceNaturally rot-resistant, holds stain well, longer lifespan than PT pine
Vinyl Fence Sections	$10-$25 per linear ft	No painting or staining needed, resists rot and insects, low long-term maintenance	Can crack in extreme cold, panel sections must match existing profile exactly	Repairing existing vinyl fences where matching panels are availableNo painting or staining needed, resists rot and insects, low long-term maintenance
Aluminum Fence Panels	$15-$35 per linear ft	Rust-free, powder-coat finish is durable, good for ornamental styles	Limited style matching, more expensive than wood for basic privacy fences	Decorative and ornamental fence repairs, pool fencingRust-free, powder-coat finish is durable, good for ornamental styles
Wrought Iron Repair (Welding)	$75-$200 per repair point	Structural and long-lasting when done right, maintains the look of ornamental iron	Requires a certified welder, not a DIY option, expensive per repair point	Historic or high-end properties with wrought iron fencingStructural and long-lasting when done right, maintains the look of ornamental iron

Other Projects in Denver

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Fence Repair

Denver Estimate

Typical Range

$306-$1,225

vs. National Average

2% above national

Cost Multiplier

1.02x

Cost Per linear ft

$77-$3573

This 1.02x estimate prices Denver labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →