How much does a fence repair cost in Dallas?

A fence repair in Dallas typically costs $269-$1,076, 10% below the $650 national average.

What is the cost per linear ft for a fence repair in Dallas?

Fence Repair in Dallas typically costs $67-$3137 per linear ft.

What are the different quality tiers for a fence repair in Dallas?

A budget fence repair in Dallas averages $287 (Replace 3-5 pickets, reset a leaning post, patch minor damage.). A mid-range project runs $940 (Replace 20-30 linear ft of fence, 2-3 posts, matching boards.). A premium renovation costs $2,645 (Major repair after storm, 50+ linear ft, multiple post replacements, gate hardware.).

How long does a fence repair take?

A fence repair typically takes 1-3 days. The minimum timeline is 1 day, and complex projects can run 1 week.

Can I DIY a fence repair?

DIY feasibility for a fence repair is rated Yes.

Cost to Fence Repair in Dallas, TX (2026)

If you’re budgeting a fence repair in Dallas, most projects run $269-$1,076, 10% below the $650 national average. What moves that number most is usually one thing: Fence Material. On its own it can swing the cost by $75 - $2,500, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Replace only the damaged pickets or boards rather than entire fence sections - a few boards at $2-$4 each beats a full panel replacement at $15-$25 per linear foot

In the Southeast (where Dallas sits): Lower labor costs across the region; Florida coastal markets slightly higher.

$269-$1,076 in Dallas

10% below the national average · 0.90x cost multiplier

In Dallas, a fence repair runs $269 to $1,076 on average - about 10% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Dallas

Line Item	Low	Mid	High
Cost per linear ft	$67	$22	$3137
Materials	$116	$386	$965
Labor	$171	$554	$1,535
Permits	$0	$0	$145
Total	$287-10% vs. national avg	$940-10% vs. national avg	$2,645-10% vs. national avg

Budget

Replace 3-5 pickets, reset a leaning post, patch minor damage.

Mid-Range

Replace 20-30 linear ft of fence, 2-3 posts, matching boards.

Premium

Major repair after storm, 50+ linear ft, multiple post replacements, gate hardware.

Material Options

Material prices below are national averages; availability in Dallas may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Pressure-Treated Wood Boards	$1.50-$4 per linear ft	Cheapest option, widely available, easy to cut and nail on-site	Needs sealing or staining every 2-3 years, will gray and crack without maintenance	Budget repairs, matching existing PT pine fencesCheapest option, widely available, easy to cut and nail on-site
Cedar Pickets	$3-$7 per linear ft	Naturally rot-resistant, holds stain well, longer lifespan than PT pine	More expensive than PT pine, harder to match if existing fence has weathered	Upgrading a section while blending with an existing cedar fenceNaturally rot-resistant, holds stain well, longer lifespan than PT pine
Vinyl Fence Sections	$10-$25 per linear ft	No painting or staining needed, resists rot and insects, low long-term maintenance	Can crack in extreme cold, panel sections must match existing profile exactly	Repairing existing vinyl fences where matching panels are availableNo painting or staining needed, resists rot and insects, low long-term maintenance
Aluminum Fence Panels	$15-$35 per linear ft	Rust-free, powder-coat finish is durable, good for ornamental styles	Limited style matching, more expensive than wood for basic privacy fences	Decorative and ornamental fence repairs, pool fencingRust-free, powder-coat finish is durable, good for ornamental styles
Wrought Iron Repair (Welding)	$75-$200 per repair point	Structural and long-lasting when done right, maintains the look of ornamental iron	Requires a certified welder, not a DIY option, expensive per repair point	Historic or high-end properties with wrought iron fencingStructural and long-lasting when done right, maintains the look of ornamental iron

Other Projects in Dallas

Central AC Installation

Roof Replacement (Asphalt Shingles)

Full Kitchen Remodel

Back to national average for Fence Repair

Dallas Estimate

Typical Range

$269-$1,076

vs. National Average

10% below national

Cost Multiplier

0.90x

Cost Per linear ft

$67-$3137

This 0.90x estimate prices Dallas labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →