Cost to Wood Privacy Fence Installation in Los Angeles, CA (2026)
If you’re budgeting a wood privacy fence installation in Los Angeles, most projects run $3,497-$9,326, 17% above the $4,500 national average. What moves that number most is usually one thing: Wood Species. On its own it can swing the cost by $1,200 - $7,500, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Choose pressure-treated pine over cedar. Pine lasts 15-20 years with a good stain and costs 20-30% less than cedar - saving $750-$1,200 on a typical 150 ft fence.
In the West Coast (where Los Angeles sits): Highest labor costs, though redwood is more available locally.
$3,497-$9,326 in Los Angeles
17% above the national average · 1.17x cost multiplier
In Los Angeles, a wood privacy fence installation runs $3,497 to $9,326 on average - about 17% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Los Angeles
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per linear ft | $23 | $35 | $58 |
| Materials | $2,115 | $3,525 | $6,463 |
| Labor | $1,208 | $2,531 | $4,372 |
| Permits | $118 | $176 | $235 |
| Total | $3,441+15% vs. national avg | $6,232+13% vs. national avg | $11,658+17% vs. national avg |
Budget
Pressure-treated pine, 6ft standard privacy style, basic dog-ear pickets, $18-$27/linear ft for 150 linear feet
Mid-Range
Cedar, 6ft, board-on-board or dog-ear style, $25-$35/linear ft for 150 linear feet
Premium
Western red cedar or redwood, 8ft, shadowbox or horizontal plank design, custom gates, $40-$70/linear ft for 150 linear feet
Material Options
Material prices below are national averages; availability in Los Angeles may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Spruce | $18-$25/linear ft installed | Tight budgets, temporary fencing, properties where appearance is secondaryLowest cost, widely available, takes stain well |
| Pressure-Treated Pine | $20-$27/linear ft installed | Best value for long-term durability on a budgetAffordable, rot-resistant treatment, 15-20 year lifespan with maintenance |
| Cedar | $25-$35/linear ft installed | Most popular choice - great balance of appearance, durability, and costNatural rot and insect resistance, beautiful grain, 20-30 year lifespan, no chemical treatment needed |
| Cypress | $27-$43/linear ft installed | Southeast homeowners wanting a durable, attractive natural woodExcellent natural rot resistance, strong, beautiful honey color |
| Redwood | $35-$120/linear ft installed | Premium builds where budget is less of a concern and aesthetics matter mostPremium appearance, exceptional durability, natural insect resistance, 30+ year lifespan |
Other Projects in Los Angeles
Los Angeles Estimate
Typical Range
$3,497-$9,326
vs. National Average
17% above national
Cost Multiplier
1.17x
Cost Per linear ft
$23-$58
This 1.17x estimate prices Los Angeles labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →