Cost to Exterior Trim Repair in Memphis, TN

$123$1,640 in Memphis

18% below the national average · 0.82x cost multiplier

Expect to pay $123–$1,640 for a exterior trim repair in Memphis, about 18% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Memphis prices.

Cost Breakdown in Memphis

Line ItemLowMidHigh
Cost per linear ft$2$8$21
Materials$66$287$738
Labor$164$697$1,722
Permits$0$0$0
Total$230-18% vs. national avg$984-18% vs. national avg$2,460-18% vs. national avg

Budget

Paint, caulk, and minor spot fills on sound trim. No rot, no replacement needed.

Mid-Range

Replace 20-40 linear ft of rotted trim boards, apply epoxy filler where needed, prime and repaint.

Premium

Extensive rot repair including fascia and soffit replacement, new PVC or fiber cement trim, full repaint.

Material Options

Material prices below are national averages; availability in Memphis may shift costs slightly.

MaterialCost/UnitBest For
Wood Trim (Finger-Jointed or Solid)$1-$3 per linear ft (material only)Budget repairs on sheltered trim, matching existing wood on older homesCheapest option, available at any lumber yard, easy to cut and nail, paintable
PVC Trim$2-$6 per linear ft (material only)Window sills, door casings, fascia, anywhere with chronic moisture exposureFully moisture-resistant, will not rot, holds paint well, dimensionally stable
Fiber Cement Trim$3-$8 per linear ft (material only)Whole-house trim upgrades, high-humidity climates, coastal environmentsExtremely durable, holds paint longer than wood or PVC, resists impact and pests
Composite Trim (Wood-Plastic Composite)$3-$7 per linear ft (material only)Mid-range renovations where wood look is preferred over PVC appearanceMoisture-resistant, consistent appearance, no knots or voids
Wood Epoxy Filler$3-$8 per linear ft (applied)Surface rot on decorative moldings, window casings, door surrounds with complex profilesPreserves original trim profile, no replacement or profile matching needed, bonds tightly

Other Projects in Memphis

Memphis Estimate

Typical Range

$123$1,640

vs. National Average

18% below national

Cost Multiplier

0.82x

Cost Per linear ft

$2–$21

Estimates apply Memphis's 0.82x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →