How much does a entry door replacement cost in Minneapolis?

A entry door replacement in Minneapolis typically costs $1,108-$3,877, 11% above the $1,800 national average.

How long does a entry door replacement take?

A entry door replacement typically takes 4-6 hours. The minimum timeline is 2 hours, and complex projects can run 2 days.

Can I DIY a entry door replacement?

DIY feasibility for a entry door replacement is rated Difficult.

Cost to Entry Door Replacement in Minneapolis, MN (2026)

If you’re budgeting a entry door replacement in Minneapolis, most projects run $1,108-$3,877, 11% above the $1,800 national average. What moves that number most is usually one thing: Door Material. On its own it can swing the cost by $300 - $3,000, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Choose fiberglass over solid wood - you'll save $500-$1,500 while getting better weather resistance and similar curb appeal

In the Midwest (where Minneapolis sits): Lower costs overall, energy-efficient doors in high demand.

$1,108-$3,877 in Minneapolis

11% above the national average · 1.11x cost multiplier

In Minneapolis, a entry door replacement runs $1,108 to $3,877 on average - about 11% above what homeowners pay nationwide. The Midwest market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Minneapolis

Line Item	Low	Mid	High
Materials	$410	$1,025	$2,563
Labor	$457	$653	$1,045
Permits	$0	$0	$51
Total	$867+16% vs. national avg	$1,678+12% vs. national avg	$3,659+9% vs. national avg

Budget

Basic steel entry door with standard frame, builder-grade hardware

Mid-Range

Fiberglass door with decorative glass insert, upgraded hardware and weatherstripping

Premium

Solid wood or premium fiberglass with sidelights, transom, custom finish, and smart lock

Material Options

Material prices below are national averages; availability in Minneapolis may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Steel	$300-$700/door	Most affordable, strong, good security, low maintenance	Can dent, poor insulation without foam core, prone to rust at edges	Budget projects, rental properties, side/back entriesMost affordable, strong, good security, low maintenance
Fiberglass	$500-$2,000/door	Won't rot, dent, or rust. Can mimic wood grain. Excellent insulation	Higher cost than steel, can crack on impact, limited repair options	Most homeowners - best all-around performance and valueWon't rot, dent, or rust. Can mimic wood grain. Excellent insulation
Solid Wood	$1,000-$3,000/door	Beautiful natural appearance, can be refinished, excellent curb appeal	Requires regular maintenance, swells/warps with humidity, most expensive	High-end homes, historic properties, covered entriesBeautiful natural appearance, can be refinished, excellent curb appeal
Wood with Fiberglass Cladding	$1,500-$2,500/door	Wood interior appearance with weather-resistant exterior, less maintenance than solid wood	Expensive, heavier than standard fiberglass	Homeowners who want wood aesthetics without full maintenance commitmentWood interior appearance with weather-resistant exterior, less maintenance than solid wood

Other Projects in Minneapolis

Furnace Replacement

Attic Insulation

Basement Finishing

Back to national average for Entry Door Replacement

Minneapolis Estimate

Typical Range

$1,108-$3,877

vs. National Average

11% above national

Cost Multiplier

1.11x

This 1.11x estimate prices Minneapolis labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →