Cost to Driveway Replacement in San Francisco, CA

$3,875–$15,500 in San Francisco

55% above the national average · 1.55x cost multiplier

Expect to pay $3,875–$15,500 for a driveway replacement in San Francisco, about 55% above the national benchmark. The West Coast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at San Francisco prices.

Cost Breakdown in San Francisco

Line Item	Low	Mid	High
Cost per sq ft	$8	$19	$39
Materials	$1,860	$3,720	$8,525
Labor	$1,705	$3,410	$6,975
Permits	$155	$233	$310
Total	$3,720+55% vs. national avg	$7,595+55% vs. national avg	$16,585+55% vs. national avg

Budget

Gravel or basic asphalt driveway, standard 2-car width (12x40 ft), minimal grading, no edging

Mid-Range

Standard concrete driveway with broom finish, proper grading and base, expansion joints, basic edging

Premium

Stamped or stained concrete, pavers, or exposed aggregate with decorative borders, proper drainage, heated options

Material Options

Material prices below are national averages; availability in San Francisco may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Concrete (Broom Finish)	$6-$12/sq ft installed	Durable (30+ year lifespan), low maintenance, clean appearance, handles heavy loads	Can crack in freeze-thaw cycles, stains from oil, plain appearance, long cure time	Most homes - best balance of durability, looks, and valueDurable (30+ year lifespan), low maintenance, clean appearance, handles heavy loads
Asphalt	$3-$7/sq ft installed	Affordable, flexible in cold climates (less cracking), easy to repair, quick installation	Needs resealing every 2-4 years, softens in extreme heat, shorter lifespan (15-20 years)	Cold-climate homes, budget projects, long driveways where cost per foot mattersAffordable, flexible in cold climates (less cracking), easy to repair, quick installation
Concrete Pavers	$10-$25/sq ft installed	Beautiful variety of patterns, individual pavers replaceable if damaged, excellent drainage joints	Most expensive option, weed growth in joints, shifting over time, slower installation	Upscale homes, design-focused projects, areas with complex shapesBeautiful variety of patterns, individual pavers replaceable if damaged, excellent drainage joints
Stamped Concrete	$12-$20/sq ft installed	Mimics stone or brick at lower cost, many patterns and colors, seamless surface	Can be slippery when wet, cracks show more than in plain concrete, resealing needed every 2-3 years	Homeowners wanting decorative look without paver installation costMimics stone or brick at lower cost, many patterns and colors, seamless surface
Gravel	$1-$3/sq ft installed	Cheapest option by far, excellent drainage, easy DIY, rustic appearance	Gravel migrates and needs replenishing, not great for snow removal, less refined appearance	Rural properties, long driveways, budget-first projects, temporary solutionsCheapest option by far, excellent drainage, easy DIY, rustic appearance

Other Projects in San Francisco

Full Kitchen Remodel

Full Bathroom Remodel

Hardwood Floor Installation

Back to national average for Driveway Replacement

San Francisco Estimate

Typical Range

$3,875–$15,500

vs. National Average

55% above national

Cost Multiplier

1.55x

Cost Per sq ft

$8–$39

Estimates apply San Francisco's 1.55x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →