Cost to Driveway Replacement in Sacramento, CA (2026)
If you’re budgeting a driveway replacement in Sacramento, most projects run $2,764-$11,054, 11% above the $5,000 national average. What moves that number most is usually one thing: Driveway Material. On its own it can swing the cost by $1,500 - $15,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Get quotes in late fall or winter when concrete contractors are less busy and may offer 10-15% discounts
In the West Coast (where Sacramento sits): Highest concrete and labor costs in the country.
$2,764-$11,054 in Sacramento
11% above the national average · 1.11x cost multiplier
In Sacramento, a driveway replacement runs $2,764 to $11,054 on average - about 11% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Sacramento
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $6 | $13 | $28 |
| Materials | $1,290 | $2,580 | $5,913 |
| Labor | $1,260 | $2,520 | $5,154 |
| Permits | $108 | $161 | $215 |
| Total | $2,658+11% vs. national avg | $5,422+11% vs. national avg | $11,820+10% vs. national avg |
Budget
Gravel or basic asphalt driveway, standard 2-car width (12x40 ft), minimal grading, no edging
Mid-Range
Standard concrete driveway with broom finish, proper grading and base, expansion joints, basic edging
Premium
Stamped or stained concrete, pavers, or exposed aggregate with decorative borders, proper drainage, heated options
Material Options
Material prices below are national averages; availability in Sacramento may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Concrete (Broom Finish) | $6-$12/sq ft installed | Most homes - best balance of durability, looks, and valueDurable (30+ year lifespan), low maintenance, clean appearance, handles heavy loads |
| Asphalt | $3-$7/sq ft installed | Cold-climate homes, budget projects, long driveways where cost per foot mattersAffordable, flexible in cold climates (less cracking), easy to repair, quick installation |
| Concrete Pavers | $10-$25/sq ft installed | Upscale homes, design-focused projects, areas with complex shapesBeautiful variety of patterns, individual pavers replaceable if damaged, excellent drainage joints |
| Stamped Concrete | $12-$20/sq ft installed | Homeowners wanting decorative look without paver installation costMimics stone or brick at lower cost, many patterns and colors, seamless surface |
| Gravel | $1-$3/sq ft installed | Rural properties, long driveways, budget-first projects, temporary solutionsCheapest option by far, excellent drainage, easy DIY, rustic appearance |
Other Projects in Sacramento
Sacramento Estimate
Typical Range
$2,764-$11,054
vs. National Average
11% above national
Cost Multiplier
1.11x
Cost Per sq ft
$6-$28
This 1.11x estimate prices Sacramento labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →