Cost to Driveway Replacement in Albuquerque, NM (2026)
If you’re budgeting a driveway replacement in Albuquerque, most projects run $2,281-$9,122, 9% below the $5,000 national average. What moves that number most is usually one thing: Driveway Material. On its own it can swing the cost by $1,500 - $15,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Get quotes in late fall or winter when concrete contractors are less busy and may offer 10-15% discounts
In the Southwest (where Albuquerque sits): Growing demand, altitude and soil conditions can add complexity.
$2,281-$9,122 in Albuquerque
9% below the national average · 0.91x cost multiplier
Expect to pay $2,281-$9,122 for a driveway replacement in Albuquerque, about 9% below the national benchmark. The Southwest region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Albuquerque prices.
Cost Breakdown in Albuquerque
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $5 | $11 | $23 |
| Materials | $1,152 | $2,304 | $5,280 |
| Labor | $935 | $1,869 | $3,824 |
| Permits | $96 | $144 | $192 |
| Total | $2,183-9% vs. national avg | $4,461-9% vs. national avg | $9,776-9% vs. national avg |
Budget
Gravel or basic asphalt driveway, standard 2-car width (12x40 ft), minimal grading, no edging
Mid-Range
Standard concrete driveway with broom finish, proper grading and base, expansion joints, basic edging
Premium
Stamped or stained concrete, pavers, or exposed aggregate with decorative borders, proper drainage, heated options
Material Options
Material prices below are national averages; availability in Albuquerque may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Concrete (Broom Finish) | $6-$12/sq ft installed | Most homes - best balance of durability, looks, and valueDurable (30+ year lifespan), low maintenance, clean appearance, handles heavy loads |
| Asphalt | $3-$7/sq ft installed | Cold-climate homes, budget projects, long driveways where cost per foot mattersAffordable, flexible in cold climates (less cracking), easy to repair, quick installation |
| Concrete Pavers | $10-$25/sq ft installed | Upscale homes, design-focused projects, areas with complex shapesBeautiful variety of patterns, individual pavers replaceable if damaged, excellent drainage joints |
| Stamped Concrete | $12-$20/sq ft installed | Homeowners wanting decorative look without paver installation costMimics stone or brick at lower cost, many patterns and colors, seamless surface |
| Gravel | $1-$3/sq ft installed | Rural properties, long driveways, budget-first projects, temporary solutionsCheapest option by far, excellent drainage, easy DIY, rustic appearance |
Other Projects in Albuquerque
Albuquerque Estimate
Typical Range
$2,281-$9,122
vs. National Average
9% below national
Cost Multiplier
0.91x
Cost Per sq ft
$5-$23
This 0.91x estimate prices Albuquerque labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →