Cost to Concrete Resurfacing in Kansas City, MO (2026)
If you’re budgeting a concrete resurfacing in Kansas City, most projects run $988-$4,447, 1% below the $2,200 national average. What moves that number most is usually one thing: Surface Area. On its own it can swing the cost by $500 - $5,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Get the existing concrete professionally cleaned and assessed before getting bids - a pressure wash reveals the true condition and prevents surprise prep charges
In the Midwest (where Kansas City sits): Most Midwest markets run 10-18% below national average.
$988-$4,447 in Kansas City
1% below the national average · 0.99x cost multiplier
Expect to pay $988-$4,447 for a concrete resurfacing in Kansas City, about 1% below the national benchmark. The Midwest region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Kansas City prices.
Cost Breakdown in Kansas City
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $1 | $3 | $8 |
| Materials | $235 | $658 | $1,880 |
| Labor | $507 | $1,216 | $4,053 |
| Permits | $0 | $0 | $0 |
| Total | $742-1% vs. national avg | $1,874-1% vs. national avg | $5,933-1% vs. national avg |
Budget
Basic thin overlay, crack prep, broom finish. Typical for a 400 sq ft patio at $1-$2/sq ft.
Mid-Range
Full resurfacing overlay with color, broom or light texture finish, 2 coats plus sealer. Typical for a 500 sq ft surface at $2-$5/sq ft.
Premium
Decorative overlay - stamped, exposed aggregate, or microtop finish - on a driveway or pool deck with heavy prep. Typical for 1,000 sq ft at $4-$8/sq ft.
Material Options
Material prices below are national averages; availability in Kansas City may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Basic Concrete Overlay | $0.50-$1.50/sq ft material | Patios and walkways in decent condition needing a cosmetic refreshLowest cost, easy to apply over sound concrete, can be tinted |
| Polymer-Modified Overlay | $1-$3/sq ft material | Driveways, pool decks, and any surface with moderate wear or previous patchingStronger bond to existing concrete, more crack resistance, takes color and texture well |
| Microtop / Microcement | $3-$8/sq ft material | Modern pool decks, covered patios, and interior concrete floors where a seamless finish is the goalUltra-thin (1-2mm), smooth contemporary look, works for indoor and outdoor surfaces |
| Stamped Concrete Overlay | $3-$8/sq ft installed | Driveways and patios where homeowners want the look of pavers or stone without full replacement costMimics stone, brick, or slate patterns at a fraction of the cost of real material, adds significant visual interest |
| Exposed Aggregate Overlay | $2-$5/sq ft installed | Pool decks (barefoot-grade aggregate), driveways, and patios where slip resistance mattersNatural pebble or stone surface finish, naturally slip-resistant, durable under vehicle traffic |
Other Projects in Kansas City
Kansas City Estimate
Typical Range
$988-$4,447
vs. National Average
1% below national
Cost Multiplier
0.99x
Cost Per sq ft
$1-$8
This 0.99x estimate prices Kansas City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →