Cost to Concrete Resurfacing in Jacksonville, FL (2026)
If you’re budgeting a concrete resurfacing in Jacksonville, most projects run $879-$3,956, 12% below the $2,200 national average. What moves that number most is usually one thing: Surface Area. On its own it can swing the cost by $500 - $5,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Get the existing concrete professionally cleaned and assessed before getting bids - a pressure wash reveals the true condition and prevents surprise prep charges
In the Southeast (where Jacksonville sits): Lower labor costs across the region; Florida coastal markets slightly higher.
$879-$3,956 in Jacksonville
12% below the national average · 0.88x cost multiplier
In Jacksonville, a concrete resurfacing runs $879 to $3,956 on average - about 12% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Jacksonville
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $1 | $3 | $7 |
| Materials | $239 | $669 | $1,910 |
| Labor | $420 | $1,008 | $3,359 |
| Permits | $0 | $0 | $0 |
| Total | $659-12% vs. national avg | $1,677-12% vs. national avg | $5,269-12% vs. national avg |
Budget
Basic thin overlay, crack prep, broom finish. Typical for a 400 sq ft patio at $1-$2/sq ft.
Mid-Range
Full resurfacing overlay with color, broom or light texture finish, 2 coats plus sealer. Typical for a 500 sq ft surface at $2-$5/sq ft.
Premium
Decorative overlay - stamped, exposed aggregate, or microtop finish - on a driveway or pool deck with heavy prep. Typical for 1,000 sq ft at $4-$8/sq ft.
Material Options
Material prices below are national averages; availability in Jacksonville may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Basic Concrete Overlay | $0.50-$1.50/sq ft material | Patios and walkways in decent condition needing a cosmetic refreshLowest cost, easy to apply over sound concrete, can be tinted |
| Polymer-Modified Overlay | $1-$3/sq ft material | Driveways, pool decks, and any surface with moderate wear or previous patchingStronger bond to existing concrete, more crack resistance, takes color and texture well |
| Microtop / Microcement | $3-$8/sq ft material | Modern pool decks, covered patios, and interior concrete floors where a seamless finish is the goalUltra-thin (1-2mm), smooth contemporary look, works for indoor and outdoor surfaces |
| Stamped Concrete Overlay | $3-$8/sq ft installed | Driveways and patios where homeowners want the look of pavers or stone without full replacement costMimics stone, brick, or slate patterns at a fraction of the cost of real material, adds significant visual interest |
| Exposed Aggregate Overlay | $2-$5/sq ft installed | Pool decks (barefoot-grade aggregate), driveways, and patios where slip resistance mattersNatural pebble or stone surface finish, naturally slip-resistant, durable under vehicle traffic |
Other Projects in Jacksonville
Jacksonville Estimate
Typical Range
$879-$3,956
vs. National Average
12% below national
Cost Multiplier
0.88x
Cost Per sq ft
$1-$7
This 0.88x estimate prices Jacksonville labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →