How much does a concrete resurfacing cost in Indianapolis?

A concrete resurfacing in Indianapolis typically costs $971-$4,368, 3% below the $2,200 national average.

What is the cost per sq ft for a concrete resurfacing in Indianapolis?

Concrete Resurfacing in Indianapolis typically costs $1-$8 per sq ft.

How long does a concrete resurfacing take?

A concrete resurfacing typically takes 2-5 days. The minimum timeline is 2 days, and complex projects can run 1 week.

Can I DIY a concrete resurfacing?

DIY feasibility for a concrete resurfacing is rated Partial.

Cost to Concrete Resurfacing in Indianapolis, IN (2026)

If you’re budgeting a concrete resurfacing in Indianapolis, most projects run $971-$4,368, 3% below the $2,200 national average. What moves that number most is usually one thing: Surface Area. On its own it can swing the cost by $500 - $5,000, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Get the existing concrete professionally cleaned and assessed before getting bids - a pressure wash reveals the true condition and prevents surprise prep charges

In the Midwest (where Indianapolis sits): Most Midwest markets run 10-18% below national average.

$971-$4,368 in Indianapolis

3% below the national average · 0.97x cost multiplier

Homeowners in Indianapolis typically spend $971-$4,368 on a concrete resurfacing, about 3% below the national average. Labor rates and contractor availability in the Midwest region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Indianapolis

Line Item	Low	Mid	High
Cost per sq ft	$1	$3	$8
Materials	$231	$648	$1,850
Labor	$497	$1,193	$3,977
Permits	$0	$0	$0
Total	$728-3% vs. national avg	$1,841-3% vs. national avg	$5,827-3% vs. national avg

Budget

Basic thin overlay, crack prep, broom finish. Typical for a 400 sq ft patio at $1-$2/sq ft.

Mid-Range

Full resurfacing overlay with color, broom or light texture finish, 2 coats plus sealer. Typical for a 500 sq ft surface at $2-$5/sq ft.

Premium

Decorative overlay - stamped, exposed aggregate, or microtop finish - on a driveway or pool deck with heavy prep. Typical for 1,000 sq ft at $4-$8/sq ft.

Material Options

Material prices below are national averages; availability in Indianapolis may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Basic Concrete Overlay	$0.50-$1.50/sq ft material	Lowest cost, easy to apply over sound concrete, can be tinted	Thin coverage (1/8 inch) doesn't hide major flaws, less durable than polymer-modified options	Patios and walkways in decent condition needing a cosmetic refreshLowest cost, easy to apply over sound concrete, can be tinted
Polymer-Modified Overlay	$1-$3/sq ft material	Stronger bond to existing concrete, more crack resistance, takes color and texture well	Costs more than basic overlay, requires proper surface prep for adhesion	Driveways, pool decks, and any surface with moderate wear or previous patchingStronger bond to existing concrete, more crack resistance, takes color and texture well
Microtop / Microcement	$3-$8/sq ft material	Ultra-thin (1-2mm), smooth contemporary look, works for indoor and outdoor surfaces	Requires highly skilled applicator, surface must be perfectly clean and sound, higher material cost	Modern pool decks, covered patios, and interior concrete floors where a seamless finish is the goalUltra-thin (1-2mm), smooth contemporary look, works for indoor and outdoor surfaces
Stamped Concrete Overlay	$3-$8/sq ft installed	Mimics stone, brick, or slate patterns at a fraction of the cost of real material, adds significant visual interest	Pattern mats require a skilled contractor, repairs are harder to blend if damaged later	Driveways and patios where homeowners want the look of pavers or stone without full replacement costMimics stone, brick, or slate patterns at a fraction of the cost of real material, adds significant visual interest
Exposed Aggregate Overlay	$2-$5/sq ft installed	Natural pebble or stone surface finish, naturally slip-resistant, durable under vehicle traffic	Texture makes it harder to clean, not suitable for bare feet on coarser aggregates	Pool decks (barefoot-grade aggregate), driveways, and patios where slip resistance mattersNatural pebble or stone surface finish, naturally slip-resistant, durable under vehicle traffic

Other Projects in Indianapolis

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Concrete Resurfacing

Indianapolis Estimate

Typical Range

$971-$4,368

vs. National Average

3% below national

Cost Multiplier

0.97x

Cost Per sq ft

$1-$8

This 0.97x estimate prices Indianapolis labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →