Cost to Concrete Driveway Repair in Tampa, FL

$752$3,290 in Tampa

6% below the national average · 0.94x cost multiplier

Homeowners in Tampa typically spend $752–$3,290 on a concrete driveway repair, about 6% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Tampa

Line ItemLowMidHigh
Cost per sq ft$141$4$7520
Materials$188$846$1,880
Labor$282$1,316$4,230
Permits$0$0$188
Total$470-6% vs. national avg$2,162-6% vs. national avg$6,298-6% vs. national avg

Budget

Crack filling and sealing, minor surface patching, DIY-friendly repairs.

Mid-Range

Resurfacing/overlay on a 2-car driveway, fill and level before overlay, new seal coat.

Premium

Mudjacking sunken sections plus panel replacement and full reseal on a large driveway.

Material Options

Material prices below are national averages; availability in Tampa may shift costs slightly.

MaterialCost/UnitBest For
Crack Filler / Polyurethane Caulk$15-$40/tubeHairline cracks and narrow surface cracks on otherwise sound slabsDIY-friendly, flexible after cure, bonds well to existing concrete
Concrete Patching Compound$20-$60/bagSurface spalling, pitting, and small holes up to 2 inches deepFills spalled areas and shallow holes, bonds well, matches concrete color reasonably
Concrete Resurfacer (Overlay)$0.50-$1.50/sq ft materialDriveways with widespread surface deterioration but a structurally sound slabRenews entire surface appearance, bonds to existing concrete, extends life 10-15 years
Mudjacking / Slabjacking$3-$6/sq ftSunken or settled concrete sections that are otherwise intactLifts sunken slabs back to grade, less expensive than full replacement, minimal disruption
Full Panel Replacement$8-$18/sq ft installedSeverely cracked, heaved, or structurally compromised panels where repair isn't viableRemoves problem entirely, new concrete has full structural integrity, 25-30 year lifespan

Other Projects in Tampa

Tampa Estimate

Typical Range

$752$3,290

vs. National Average

6% below national

Cost Multiplier

0.94x

Cost Per sq ft

$141–$7520

Estimates apply Tampa's 0.94x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →