Cost to Concrete Driveway Repair in San Francisco, CA
$1,240–$5,425 in San Francisco
55% above the national average · 1.55x cost multiplier
Expect to pay $1,240–$5,425 for a concrete driveway repair in San Francisco, about 55% above the national benchmark. The West Coast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at San Francisco prices.
Cost Breakdown in San Francisco
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $233 | $6 | $12400 |
| Materials | $310 | $1,395 | $3,100 |
| Labor | $465 | $2,170 | $6,975 |
| Permits | $0 | $0 | $310 |
| Total | $775+55% vs. national avg | $3,565+55% vs. national avg | $10,385+55% vs. national avg |
Budget
Crack filling and sealing, minor surface patching, DIY-friendly repairs.
Mid-Range
Resurfacing/overlay on a 2-car driveway, fill and level before overlay, new seal coat.
Premium
Mudjacking sunken sections plus panel replacement and full reseal on a large driveway.
Material Options
Material prices below are national averages; availability in San Francisco may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Crack Filler / Polyurethane Caulk | $15-$40/tube | Hairline cracks and narrow surface cracks on otherwise sound slabsDIY-friendly, flexible after cure, bonds well to existing concrete |
| Concrete Patching Compound | $20-$60/bag | Surface spalling, pitting, and small holes up to 2 inches deepFills spalled areas and shallow holes, bonds well, matches concrete color reasonably |
| Concrete Resurfacer (Overlay) | $0.50-$1.50/sq ft material | Driveways with widespread surface deterioration but a structurally sound slabRenews entire surface appearance, bonds to existing concrete, extends life 10-15 years |
| Mudjacking / Slabjacking | $3-$6/sq ft | Sunken or settled concrete sections that are otherwise intactLifts sunken slabs back to grade, less expensive than full replacement, minimal disruption |
| Full Panel Replacement | $8-$18/sq ft installed | Severely cracked, heaved, or structurally compromised panels where repair isn't viableRemoves problem entirely, new concrete has full structural integrity, 25-30 year lifespan |
Other Projects in San Francisco
San Francisco Estimate
Typical Range
$1,240–$5,425
vs. National Average
55% above national
Cost Multiplier
1.55x
Cost Per sq ft
$233–$12400
Estimates apply San Francisco's 1.55x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.
See national average costs →