Cost to Concrete Driveway Repair in Richmond, VA

$744$3,255 in Richmond

7% below the national average · 0.93x cost multiplier

Homeowners in Richmond typically spend $744–$3,255 on a concrete driveway repair, about 7% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Richmond

Line ItemLowMidHigh
Cost per sq ft$140$4$7440
Materials$186$837$1,860
Labor$279$1,302$4,185
Permits$0$0$186
Total$465-7% vs. national avg$2,139-7% vs. national avg$6,231-7% vs. national avg

Budget

Crack filling and sealing, minor surface patching, DIY-friendly repairs.

Mid-Range

Resurfacing/overlay on a 2-car driveway, fill and level before overlay, new seal coat.

Premium

Mudjacking sunken sections plus panel replacement and full reseal on a large driveway.

Material Options

Material prices below are national averages; availability in Richmond may shift costs slightly.

MaterialCost/UnitBest For
Crack Filler / Polyurethane Caulk$15-$40/tubeHairline cracks and narrow surface cracks on otherwise sound slabsDIY-friendly, flexible after cure, bonds well to existing concrete
Concrete Patching Compound$20-$60/bagSurface spalling, pitting, and small holes up to 2 inches deepFills spalled areas and shallow holes, bonds well, matches concrete color reasonably
Concrete Resurfacer (Overlay)$0.50-$1.50/sq ft materialDriveways with widespread surface deterioration but a structurally sound slabRenews entire surface appearance, bonds to existing concrete, extends life 10-15 years
Mudjacking / Slabjacking$3-$6/sq ftSunken or settled concrete sections that are otherwise intactLifts sunken slabs back to grade, less expensive than full replacement, minimal disruption
Full Panel Replacement$8-$18/sq ft installedSeverely cracked, heaved, or structurally compromised panels where repair isn't viableRemoves problem entirely, new concrete has full structural integrity, 25-30 year lifespan

Other Projects in Richmond

Richmond Estimate

Typical Range

$744$3,255

vs. National Average

7% below national

Cost Multiplier

0.93x

Cost Per sq ft

$140–$7440

Estimates apply Richmond's 0.93x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →