How much does a concrete driveway repair cost in Raleigh?

A concrete driveway repair in Raleigh typically costs $731-$3,197, 9% below the $1,800 national average.

What is the cost per sq ft for a concrete driveway repair in Raleigh?

Concrete Driveway Repair in Raleigh typically costs $137-$7308 per sq ft.

What are the different quality tiers for a concrete driveway repair in Raleigh?

A budget concrete driveway repair in Raleigh averages $458 (Crack filling and sealing, minor surface patching, DIY-friendly repairs.). A mid-range project runs $2,107 (Resurfacing/overlay on a 2-car driveway, fill and level before overlay, new seal coat.). A premium renovation costs $6,113 (Mudjacking sunken sections plus panel replacement and full reseal on a large driveway.).

How long does a concrete driveway repair take?

A concrete driveway repair typically takes 1-3 days. The minimum timeline is 1 day, and complex projects can run 1 week.

Can I DIY a concrete driveway repair?

DIY feasibility for a concrete driveway repair is rated Partial.

Cost to Concrete Driveway Repair in Raleigh, NC (2026)

If you’re budgeting a concrete driveway repair in Raleigh, most projects run $731-$3,197, 9% below the $1,800 national average. What moves that number most is usually one thing: Type of Repair Needed. On its own it can swing the cost by $150 - $5,000, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Address cracks early - a $40 tube of crack filler applied to a fresh crack prevents a $2,000 resurfacing job 2-3 years later

In the Southeast (where Raleigh sits): Lower labor costs across the region; Florida coastal markets slightly higher.

$731-$3,197 in Raleigh

9% below the national average · 0.91x cost multiplier

Homeowners in Raleigh typically spend $731-$3,197 on a concrete driveway repair, about 9% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Raleigh

Line Item	Low	Mid	High
Cost per sq ft	$137	$4	$7308
Materials	$190	$855	$1,900
Labor	$268	$1,252	$4,023
Permits	$0	$0	$190
Total	$458-8% vs. national avg	$2,107-8% vs. national avg	$6,113-9% vs. national avg

Budget

Crack filling and sealing, minor surface patching, DIY-friendly repairs.

Mid-Range

Resurfacing/overlay on a 2-car driveway, fill and level before overlay, new seal coat.

Premium

Mudjacking sunken sections plus panel replacement and full reseal on a large driveway.

Material Options

Material prices below are national averages; availability in Raleigh may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Crack Filler / Polyurethane Caulk	$15-$40/tube	DIY-friendly, flexible after cure, bonds well to existing concrete	Only appropriate for cracks under 1/2 inch wide, not a structural fix	Hairline cracks and narrow surface cracks on otherwise sound slabsDIY-friendly, flexible after cure, bonds well to existing concrete
Concrete Patching Compound	$20-$60/bag	Fills spalled areas and shallow holes, bonds well, matches concrete color reasonably	Visible patch lines, can pop out if base isn't properly prepared	Surface spalling, pitting, and small holes up to 2 inches deepFills spalled areas and shallow holes, bonds well, matches concrete color reasonably
Concrete Resurfacer (Overlay)	$0.50-$1.50/sq ft material	Renews entire surface appearance, bonds to existing concrete, extends life 10-15 years	Requires clean and profiled surface, won't fix structural cracks or sinking	Driveways with widespread surface deterioration but a structurally sound slabRenews entire surface appearance, bonds to existing concrete, extends life 10-15 years
Mudjacking / Slabjacking	$3-$6/sq ft	Lifts sunken slabs back to grade, less expensive than full replacement, minimal disruption	Doesn't fix the underlying soil problem permanently, not suitable for severely cracked slabs	Sunken or settled concrete sections that are otherwise intactLifts sunken slabs back to grade, less expensive than full replacement, minimal disruption
Full Panel Replacement	$8-$18/sq ft installed	Removes problem entirely, new concrete has full structural integrity, 25-30 year lifespan	Most expensive option, requires saw cutting and full demo, new section may not match aged concrete	Severely cracked, heaved, or structurally compromised panels where repair isn't viableRemoves problem entirely, new concrete has full structural integrity, 25-30 year lifespan

Other Projects in Raleigh

Full Kitchen Remodel

Full Bathroom Remodel

Composite Deck Building

Back to national average for Concrete Driveway Repair

Raleigh Estimate

Typical Range

$731-$3,197

vs. National Average

9% below national

Cost Multiplier

0.91x

Cost Per sq ft

$137-$7308

This 0.91x estimate prices Raleigh labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →