Cost to Concrete Driveway Repair in Minneapolis, MN

$840$3,675 in Minneapolis

5% above the national average · 1.05x cost multiplier

In Minneapolis, a concrete driveway repair runs $840 to $3,675 on average — about 5% above what homeowners pay nationwide. The Midwest market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Minneapolis

Line ItemLowMidHigh
Cost per sq ft$158$4$8400
Materials$210$945$2,100
Labor$315$1,470$4,725
Permits$0$0$210
Total$525+5% vs. national avg$2,415+5% vs. national avg$7,035+5% vs. national avg

Budget

Crack filling and sealing, minor surface patching, DIY-friendly repairs.

Mid-Range

Resurfacing/overlay on a 2-car driveway, fill and level before overlay, new seal coat.

Premium

Mudjacking sunken sections plus panel replacement and full reseal on a large driveway.

Material Options

Material prices below are national averages; availability in Minneapolis may shift costs slightly.

MaterialCost/UnitBest For
Crack Filler / Polyurethane Caulk$15-$40/tubeHairline cracks and narrow surface cracks on otherwise sound slabsDIY-friendly, flexible after cure, bonds well to existing concrete
Concrete Patching Compound$20-$60/bagSurface spalling, pitting, and small holes up to 2 inches deepFills spalled areas and shallow holes, bonds well, matches concrete color reasonably
Concrete Resurfacer (Overlay)$0.50-$1.50/sq ft materialDriveways with widespread surface deterioration but a structurally sound slabRenews entire surface appearance, bonds to existing concrete, extends life 10-15 years
Mudjacking / Slabjacking$3-$6/sq ftSunken or settled concrete sections that are otherwise intactLifts sunken slabs back to grade, less expensive than full replacement, minimal disruption
Full Panel Replacement$8-$18/sq ft installedSeverely cracked, heaved, or structurally compromised panels where repair isn't viableRemoves problem entirely, new concrete has full structural integrity, 25-30 year lifespan

Other Projects in Minneapolis

Minneapolis Estimate

Typical Range

$840$3,675

vs. National Average

5% above national

Cost Multiplier

1.05x

Cost Per sq ft

$158–$8400

Estimates apply Minneapolis's 1.05x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →