Cost to Concrete Driveway Repair in Los Angeles, CA
$1,080–$4,725 in Los Angeles
35% above the national average · 1.35x cost multiplier
In Los Angeles, a concrete driveway repair runs $1,080 to $4,725 on average — about 35% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Los Angeles
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $203 | $5 | $10800 |
| Materials | $270 | $1,215 | $2,700 |
| Labor | $405 | $1,890 | $6,075 |
| Permits | $0 | $0 | $270 |
| Total | $675+35% vs. national avg | $3,105+35% vs. national avg | $9,045+35% vs. national avg |
Budget
Crack filling and sealing, minor surface patching, DIY-friendly repairs.
Mid-Range
Resurfacing/overlay on a 2-car driveway, fill and level before overlay, new seal coat.
Premium
Mudjacking sunken sections plus panel replacement and full reseal on a large driveway.
Material Options
Material prices below are national averages; availability in Los Angeles may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Crack Filler / Polyurethane Caulk | $15-$40/tube | Hairline cracks and narrow surface cracks on otherwise sound slabsDIY-friendly, flexible after cure, bonds well to existing concrete |
| Concrete Patching Compound | $20-$60/bag | Surface spalling, pitting, and small holes up to 2 inches deepFills spalled areas and shallow holes, bonds well, matches concrete color reasonably |
| Concrete Resurfacer (Overlay) | $0.50-$1.50/sq ft material | Driveways with widespread surface deterioration but a structurally sound slabRenews entire surface appearance, bonds to existing concrete, extends life 10-15 years |
| Mudjacking / Slabjacking | $3-$6/sq ft | Sunken or settled concrete sections that are otherwise intactLifts sunken slabs back to grade, less expensive than full replacement, minimal disruption |
| Full Panel Replacement | $8-$18/sq ft installed | Severely cracked, heaved, or structurally compromised panels where repair isn't viableRemoves problem entirely, new concrete has full structural integrity, 25-30 year lifespan |
Other Projects in Los Angeles
Los Angeles Estimate
Typical Range
$1,080–$4,725
vs. National Average
35% above national
Cost Multiplier
1.35x
Cost Per sq ft
$203–$10800
Estimates apply Los Angeles's 1.35x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.
See national average costs →