Cost to Concrete Driveway Repair in Austin, TX

$840–$3,675 in Austin

5% above the national average · 1.05x cost multiplier

Homeowners in Austin typically spend $840–$3,675 on a concrete driveway repair, about 5% above the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Austin

Line Item	Low	Mid	High
Cost per sq ft	$158	$4	$8400
Materials	$210	$945	$2,100
Labor	$315	$1,470	$4,725
Permits	$0	$0	$210
Total	$525+5% vs. national avg	$2,415+5% vs. national avg	$7,035+5% vs. national avg

Budget

Crack filling and sealing, minor surface patching, DIY-friendly repairs.

Mid-Range

Resurfacing/overlay on a 2-car driveway, fill and level before overlay, new seal coat.

Premium

Mudjacking sunken sections plus panel replacement and full reseal on a large driveway.

Material Options

Material prices below are national averages; availability in Austin may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Crack Filler / Polyurethane Caulk	$15-$40/tube	DIY-friendly, flexible after cure, bonds well to existing concrete	Only appropriate for cracks under 1/2 inch wide, not a structural fix	Hairline cracks and narrow surface cracks on otherwise sound slabsDIY-friendly, flexible after cure, bonds well to existing concrete
Concrete Patching Compound	$20-$60/bag	Fills spalled areas and shallow holes, bonds well, matches concrete color reasonably	Visible patch lines, can pop out if base isn't properly prepared	Surface spalling, pitting, and small holes up to 2 inches deepFills spalled areas and shallow holes, bonds well, matches concrete color reasonably
Concrete Resurfacer (Overlay)	$0.50-$1.50/sq ft material	Renews entire surface appearance, bonds to existing concrete, extends life 10-15 years	Requires clean and profiled surface, won't fix structural cracks or sinking	Driveways with widespread surface deterioration but a structurally sound slabRenews entire surface appearance, bonds to existing concrete, extends life 10-15 years
Mudjacking / Slabjacking	$3-$6/sq ft	Lifts sunken slabs back to grade, less expensive than full replacement, minimal disruption	Doesn't fix the underlying soil problem permanently, not suitable for severely cracked slabs	Sunken or settled concrete sections that are otherwise intactLifts sunken slabs back to grade, less expensive than full replacement, minimal disruption
Full Panel Replacement	$8-$18/sq ft installed	Removes problem entirely, new concrete has full structural integrity, 25-30 year lifespan	Most expensive option, requires saw cutting and full demo, new section may not match aged concrete	Severely cracked, heaved, or structurally compromised panels where repair isn't viableRemoves problem entirely, new concrete has full structural integrity, 25-30 year lifespan

Other Projects in Austin

Central AC Installation

Full Kitchen Remodel

Composite Deck Building

Back to national average for Concrete Driveway Repair

Austin Estimate

Typical Range

$840–$3,675

vs. National Average

5% above national

Cost Multiplier

1.05x

Cost Per sq ft

$158–$8400

Estimates apply Austin's 1.05x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →