Cost to Concrete Driveway Repair in Albuquerque, NM

$736–$3,220 in Albuquerque

8% below the national average · 0.92x cost multiplier

Expect to pay $736–$3,220 for a concrete driveway repair in Albuquerque, about 8% below the national benchmark. The Southwest region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Albuquerque prices.

Cost Breakdown in Albuquerque

Line Item	Low	Mid	High
Cost per sq ft	$138	$4	$7360
Materials	$184	$828	$1,840
Labor	$276	$1,288	$4,140
Permits	$0	$0	$184
Total	$460-8% vs. national avg	$2,116-8% vs. national avg	$6,164-8% vs. national avg

Budget

Crack filling and sealing, minor surface patching, DIY-friendly repairs.

Mid-Range

Resurfacing/overlay on a 2-car driveway, fill and level before overlay, new seal coat.

Premium

Mudjacking sunken sections plus panel replacement and full reseal on a large driveway.

Material Options

Material prices below are national averages; availability in Albuquerque may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Crack Filler / Polyurethane Caulk	$15-$40/tube	DIY-friendly, flexible after cure, bonds well to existing concrete	Only appropriate for cracks under 1/2 inch wide, not a structural fix	Hairline cracks and narrow surface cracks on otherwise sound slabsDIY-friendly, flexible after cure, bonds well to existing concrete
Concrete Patching Compound	$20-$60/bag	Fills spalled areas and shallow holes, bonds well, matches concrete color reasonably	Visible patch lines, can pop out if base isn't properly prepared	Surface spalling, pitting, and small holes up to 2 inches deepFills spalled areas and shallow holes, bonds well, matches concrete color reasonably
Concrete Resurfacer (Overlay)	$0.50-$1.50/sq ft material	Renews entire surface appearance, bonds to existing concrete, extends life 10-15 years	Requires clean and profiled surface, won't fix structural cracks or sinking	Driveways with widespread surface deterioration but a structurally sound slabRenews entire surface appearance, bonds to existing concrete, extends life 10-15 years
Mudjacking / Slabjacking	$3-$6/sq ft	Lifts sunken slabs back to grade, less expensive than full replacement, minimal disruption	Doesn't fix the underlying soil problem permanently, not suitable for severely cracked slabs	Sunken or settled concrete sections that are otherwise intactLifts sunken slabs back to grade, less expensive than full replacement, minimal disruption
Full Panel Replacement	$8-$18/sq ft installed	Removes problem entirely, new concrete has full structural integrity, 25-30 year lifespan	Most expensive option, requires saw cutting and full demo, new section may not match aged concrete	Severely cracked, heaved, or structurally compromised panels where repair isn't viableRemoves problem entirely, new concrete has full structural integrity, 25-30 year lifespan

Other Projects in Albuquerque

Central AC Installation

Roof Replacement (Asphalt Shingles)

Full Kitchen Remodel

Back to national average for Concrete Driveway Repair

Albuquerque Estimate

Typical Range

$736–$3,220

vs. National Average

8% below national

Cost Multiplier

0.92x

Cost Per sq ft

$138–$7360

Estimates apply Albuquerque's 0.92x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →