Cost to Concrete Crack Repair in Philadelphia, PA (2026)
If you’re budgeting a concrete crack repair in Philadelphia, most projects run $266-$1,066, 7% above the $500 national average. What moves that number most is usually one thing: Crack Width and Depth. On its own it can swing the cost by $5-$25/linear ft, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Fill small cracks yourself as they appear. A $10-$15 tube of polyurethane concrete caulk handles most hairline cracks. Ignoring a small crack for two years allows water to widen and deepen it into a $500-$1,500 problem.
In the Northeast (where Philadelphia sits): Freeze-thaw cycles increase crack severity and repair frequency; higher labor rates.
$266-$1,066 in Philadelphia
7% above the national average · 1.07x cost multiplier
Expect to pay $266-$1,066 for a concrete crack repair in Philadelphia, about 7% above the national benchmark. The Northeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Philadelphia prices.
Cost Breakdown in Philadelphia
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per | $NaN | $NaN | $NaN |
| Materials | $44 | $166 | $444 |
| Labor | $157 | $419 | $943 |
| Permits | $0 | $0 | $0 |
| Total | $201+6% vs. national avg | $585+6% vs. national avg | $1,387+7% vs. national avg |
Budget
Cleaning and filling hairline or surface cracks (under 1/4 inch wide) in a driveway or patio with polyurethane or concrete caulk. Up to 15-20 linear feet of minor cracks.
Mid-Range
Chiseling out and filling 20-40 linear feet of cracks in a driveway or patio with epoxy injection or polymer-modified filler. Includes prep, fill, and sealcoat over the repaired area.
Premium
Structural crack repair in a foundation wall or garage floor - epoxy injection under pressure for active cracks, or polyurethane foam injection to stop water infiltration. 40-80 linear feet, includes sealing.
Material Options
Material prices below are national averages; availability in Philadelphia may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Polyurethane Concrete Caulk | $8-$20/tube | Control joint cracks, cosmetic surface cracks in driveways and walkwaysFlexible, handles freeze-thaw cycles, good adhesion, easy DIY application |
| Epoxy Injection | $25-$60/cartridge | Structural cracks in foundations, garage floors, and walls where movement has stoppedBonds stronger than the surrounding concrete, good for structural cracks, creates a rigid fill |
| Polyurethane Foam Injection | $30-$80/cartridge | Basement and foundation cracks with active water infiltrationExpands to fill irregular voids, works on wet and actively leaking cracks, flexible after cure |
| Hydraulic Cement | $15-$30/bag | Emergency patching of actively leaking holes and cracks in basement wallsSets very fast (3-5 minutes), expands slightly, stops active water flow |
| Polymer-Modified Concrete Patch | $15-$35/bag | Wide surface cracks and spalled areas in driveways, steps, and garage floorsGood adhesion, handles traffic well, can be shaped and tooled, matches surrounding concrete better |
Other Projects in Philadelphia
Philadelphia Estimate
Typical Range
$266-$1,066
vs. National Average
7% above national
Cost Multiplier
1.07x
Cost Per
$NaN-$NaN
This 1.07x estimate prices Philadelphia labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →