Cost to Asphalt Driveway Repair in Albuquerque, NM
$322–$3,220 in Albuquerque
8% below the national average · 0.92x cost multiplier
Expect to pay $322–$3,220 for a asphalt driveway repair in Albuquerque, about 8% below the national benchmark. The Southwest region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Albuquerque prices.
Cost Breakdown in Albuquerque
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per project | $92 | $1104 | $5520 |
| Materials | $138 | $552 | $1,656 |
| Labor | $230 | $1,012 | $2,576 |
| Permits | $0 | $0 | $138 |
| Total | $368-8% vs. national avg | $1,564-8% vs. national avg | $4,370-8% vs. national avg |
Budget
Crack sealing plus sealcoating a standard 600 sq ft driveway — fills cracks up to 1/2 inch wide and applies a protective coat.
Mid-Range
Patching potholes and damaged sections plus full resurfacing — best when surface has widespread cracking but base is still sound.
Premium
Partial or full replacement with new hot-mix asphalt — necessary when the base has failed, drainage problems exist, or damage is too extensive to resurface.
Material Options
Material prices below are national averages; availability in Albuquerque may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Cold Patch Asphalt | $2-$5 per sq ft | DIY pothole patches, temporary repairs, small isolated damage spotsNo equipment needed, available at hardware stores, can be applied in any weather |
| Hot Mix Asphalt (Patching) | $3-$7 per sq ft installed | Contractor-installed pothole repairs, damaged sections requiring removal and replacementDurable, bonds well to existing asphalt, matches original appearance when done correctly |
| Asphalt Overlay / Resurfacing | $1.50-$4 per sq ft | Driveways with widespread surface cracking but intact base, preparation before selling a homeRejuvenates the entire driveway surface, hides cosmetic damage, extends driveway life 10-15 years if base is sound |
| Full Asphalt Replacement | $3-$10 per sq ft | Driveways with failed base, severe alligator cracking, drainage issues, or asphalt more than 20 years oldAddresses base problems, fresh start with 20-30 year lifespan, opportunity to improve grading and drainage |
Other Projects in Albuquerque
Albuquerque Estimate
Typical Range
$322–$3,220
vs. National Average
8% below national
Cost Multiplier
0.92x
Cost Per project
$92–$5520
Estimates apply Albuquerque's 0.92x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.
See national average costs →