How much does a smoke & co detector installation cost in Salt Lake City?

A smoke & co detector installation in Salt Lake City typically costs $587-$2,740, 2% below the $1,400 national average.

What is the cost per per detector installed for a smoke & co detector installation in Salt Lake City?

Smoke & CO Detector Installation in Salt Lake City typically costs $73-$215 per per detector installed.

How long does a smoke & co detector installation take?

A smoke & co detector installation typically takes 3-6 hours (hardwired professional install). The minimum timeline is 1-2 hours (battery units, self-install), and complex projects can run 1-2 days (whole-house smart system with new circuits).

Can I DIY a smoke & co detector installation?

DIY feasibility for a smoke & co detector installation is rated Partial.

Cost to Smoke & CO Detector Installation in Salt Lake City, UT (2026)

If you’re budgeting a smoke & co detector installation in Salt Lake City, most projects run $587-$2,740, 2% below the $1,400 national average. What moves that number most is usually one thing: Battery-only vs. hardwired interconnected. On its own it can swing the cost by $500 - $2,000 difference in total install, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Replace all detectors at once rather than one at a time. If any detector is more than 10 years old (check the date on the back), replace the whole system. Detector sensitivity degrades with age. Doing all at once also means one electrician visit and one set of hardware.

In the Mountain West (where Salt Lake City sits): Near national average; CO detector requirements are strict at high altitude.

$587-$2,740 in Salt Lake City

2% below the national average · 0.98x cost multiplier

Homeowners in Salt Lake City typically spend $587-$2,740 on a smoke & co detector installation, about 2% below the national average. Labor rates and contractor availability in the Mountain West region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Salt Lake City

Line Item	Low	Mid	High
Cost per per detector installed	$73	$132	$215
Materials	$125	$364	$936
Labor	$0	$652	$1,305
Permits	$0	$78	$156
Total	$125+4% vs. national avg	$1,094-3% vs. national avg	$2,397-2% vs. national avg

Budget

Battery-only standalone detectors (not interconnected). Self-install: 3-4 units covering bedrooms and hallways. No electrician required. Meets minimum code in many jurisdictions.

Mid-Range

Hardwired interconnected system: 6-8 combination smoke/CO detectors with battery backup, professionally installed on existing 120V circuits in bedrooms, hallways, and living areas.

Premium

Full interconnected hardwired system: 10-14 smart detectors (Nest Protect or similar) with Wi-Fi, smartphone alerts, voice alarms, and new dedicated circuit. Integrated with security system.

Material Options

Material prices below are national averages; availability in Salt Lake City may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Battery-powered standalone (First Alert, Kidde)	$20-$45	No electrician required, easy self-install, no wiring needed	Not interconnected (only local alarm), battery replacement required, often 10-year sealed battery	Rental units, budget installs, supplemental coverage where wiring isn't practicalNo electrician required, easy self-install, no wiring needed
Hardwired interconnected (standard)	$30-$60	Interconnected so all units sound when one triggers, battery backup, meets all building codes	Requires electrician, older homes may need new wiring	New construction, renovations opening walls, code compliance in all jurisdictionsInterconnected so all units sound when one triggers, battery backup, meets all building codes
Hardwired with wireless interconnect	$45-$90	Interconnected without running extra interconnect wire between units, good retrofit option	More expensive than standard hardwired, some brands have proprietary interconnect frequencies	Retrofit installs in existing homes with smoke detector boxes but no interconnect wireInterconnected without running extra interconnect wire between units, good retrofit option
Nest Protect (wired version)	$120-$140	Wi-Fi alerts to phone, voice alarm identifies location, monthly self-test, 10-year lifespan, app control	Premium price, requires Google account, only connects with other Nest Protect units	Homeowners who want smartphone notifications and smart home integrationWi-Fi alerts to phone, voice alarm identifies location, monthly self-test, 10-year lifespan, app control
Kidde Smoke/CO Detector with Wi-Fi	$70-$100	Less expensive than Nest, works with Alexa/Google, phone alerts, interconnects with other Kidde units	App is less polished than Nest, requires Kidde account	Smart features at lower per-unit cost than Nest, Amazon Echo householdsLess expensive than Nest, works with Alexa/Google, phone alerts, interconnects with other Kidde units
Combination smoke/CO/natural gas detector	$80-$150	Detects three threat types in one unit, reduces total number of devices needed	Gas sensors have shorter lifespan (5-7 years) than smoke sensors (10 years)	Homes with natural gas appliances, kitchens, utility roomsDetects three threat types in one unit, reduces total number of devices needed

Other Projects in Salt Lake City

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Smoke & CO Detector Installation

Salt Lake City Estimate

Typical Range

$587-$2,740

vs. National Average

2% below national

Cost Multiplier

0.98x

Cost Per per detector installed

$73-$215

This 0.98x estimate prices Salt Lake City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →