How much does a smoke & co detector installation cost in Boston?

A smoke & co detector installation in Boston typically costs $698-$3,258, 16% above the $1,400 national average.

What is the cost per per detector installed for a smoke & co detector installation in Boston?

Smoke & CO Detector Installation in Boston typically costs $87-$256 per per detector installed.

How long does a smoke & co detector installation take?

A smoke & co detector installation typically takes 3-6 hours (hardwired professional install). The minimum timeline is 1-2 hours (battery units, self-install), and complex projects can run 1-2 days (whole-house smart system with new circuits).

Can I DIY a smoke & co detector installation?

DIY feasibility for a smoke & co detector installation is rated Partial.

Cost to Smoke & CO Detector Installation in Boston, MA (2026)

If you’re budgeting a smoke & co detector installation in Boston, most projects run $698-$3,258, 16% above the $1,400 national average. What moves that number most is usually one thing: Battery-only vs. hardwired interconnected. On its own it can swing the cost by $500 - $2,000 difference in total install, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Replace all detectors at once rather than one at a time. If any detector is more than 10 years old (check the date on the back), replace the whole system. Detector sensitivity degrades with age. Doing all at once also means one electrician visit and one set of hardware.

In the Northeast (where Boston sits): Higher electrician labor rates drive up hardwired installation costs.

$698-$3,258 in Boston

16% above the national average · 1.16x cost multiplier

In Boston, a smoke & co detector installation runs $698 to $3,258 on average - about 16% above what homeowners pay nationwide. The Northeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Boston

Line Item	Low	Mid	High
Cost per per detector installed	$87	$157	$256
Materials	$139	$406	$1,044
Labor	$0	$816	$1,633
Permits	$0	$87	$174
Total	$139+16% vs. national avg	$1,309+16% vs. national avg	$2,851+16% vs. national avg

Budget

Battery-only standalone detectors (not interconnected). Self-install: 3-4 units covering bedrooms and hallways. No electrician required. Meets minimum code in many jurisdictions.

Mid-Range

Hardwired interconnected system: 6-8 combination smoke/CO detectors with battery backup, professionally installed on existing 120V circuits in bedrooms, hallways, and living areas.

Premium

Full interconnected hardwired system: 10-14 smart detectors (Nest Protect or similar) with Wi-Fi, smartphone alerts, voice alarms, and new dedicated circuit. Integrated with security system.

Material Options

Material prices below are national averages; availability in Boston may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Battery-powered standalone (First Alert, Kidde)	$20-$45	No electrician required, easy self-install, no wiring needed	Not interconnected (only local alarm), battery replacement required, often 10-year sealed battery	Rental units, budget installs, supplemental coverage where wiring isn't practicalNo electrician required, easy self-install, no wiring needed
Hardwired interconnected (standard)	$30-$60	Interconnected so all units sound when one triggers, battery backup, meets all building codes	Requires electrician, older homes may need new wiring	New construction, renovations opening walls, code compliance in all jurisdictionsInterconnected so all units sound when one triggers, battery backup, meets all building codes
Hardwired with wireless interconnect	$45-$90	Interconnected without running extra interconnect wire between units, good retrofit option	More expensive than standard hardwired, some brands have proprietary interconnect frequencies	Retrofit installs in existing homes with smoke detector boxes but no interconnect wireInterconnected without running extra interconnect wire between units, good retrofit option
Nest Protect (wired version)	$120-$140	Wi-Fi alerts to phone, voice alarm identifies location, monthly self-test, 10-year lifespan, app control	Premium price, requires Google account, only connects with other Nest Protect units	Homeowners who want smartphone notifications and smart home integrationWi-Fi alerts to phone, voice alarm identifies location, monthly self-test, 10-year lifespan, app control
Kidde Smoke/CO Detector with Wi-Fi	$70-$100	Less expensive than Nest, works with Alexa/Google, phone alerts, interconnects with other Kidde units	App is less polished than Nest, requires Kidde account	Smart features at lower per-unit cost than Nest, Amazon Echo householdsLess expensive than Nest, works with Alexa/Google, phone alerts, interconnects with other Kidde units
Combination smoke/CO/natural gas detector	$80-$150	Detects three threat types in one unit, reduces total number of devices needed	Gas sensors have shorter lifespan (5-7 years) than smoke sensors (10 years)	Homes with natural gas appliances, kitchens, utility roomsDetects three threat types in one unit, reduces total number of devices needed

Other Projects in Boston

Full Bathroom Remodel

Full Kitchen Remodel

Window Replacement

Back to national average for Smoke & CO Detector Installation

Boston Estimate

Typical Range

$698-$3,258

vs. National Average

16% above national

Cost Multiplier

1.16x

Cost Per per detector installed

$87-$256

This 1.16x estimate prices Boston labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →