Cost to Recessed Lighting Installation in Jacksonville, FL (2026)
If you’re budgeting a recessed lighting installation in Jacksonville, most projects run $133-$266, 11% below the $200 national average. What moves that number most is usually one thing: Number of Lights. On its own it can swing the cost by $100 - $300 per light, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Install all the lights in a room at once rather than adding one or two at a time - the per-light cost drops significantly
In the Southeast (where Jacksonville sits): Lower labor costs and competitive markets keep recessed lighting 10-15% below the national average.
$133-$266 in Jacksonville
11% below the national average · 0.89x cost multiplier
In Jacksonville, a recessed lighting installation runs $133 to $266 on average - about 11% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Jacksonville
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per light | $133 | $177 | $266 |
| Materials | $334 | $573 | $955 |
| Labor | $324 | $566 | $890 |
| Permits | $0 | $96 | $143 |
| Total | $658-12% vs. national avg | $1,235-12% vs. national avg | $2,227-11% vs. national avg |
Budget
6 basic IC-rated LED can lights, new construction housings in accessible attic space, single switch, standard 5-6 inch cans
Mid-Range
8 slim LED recessed lights with adjustable color temperature, dimmer switch, remodel housings, baffled trims
Premium
10-12 architectural-grade LED fixtures, multiple dimming zones, smart controls, custom layout design, premium trims and finishes
Material Options
Material prices below are national averages; availability in Jacksonville may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Standard IC-Rated LED Can Light | $15 - $25 per fixture | New construction, open ceilings, budget-focused projectsAffordable, widely available, IC rated for insulation contact, integrated LED saves on bulbs |
| Slim Profile LED (Canless) | $20 - $40 per fixture | Remodel projects, low-clearance ceilings, finished ceilings without attic accessNo housing required, fits in tight spaces, thinner profile, easy remodel installation |
| Adjustable Gimbal Light | $30 - $50 per fixture | Living rooms with artwork, kitchen task areas, accent lightingDirectional aiming for artwork or features, adjustable angle, modern look |
| Color-Tunable LED | $35 - $60 per fixture | Kitchens, home offices, spaces used at different times of daySwitch between warm and cool white, adapt to time of day or mood, single fixture does double duty |
| Smart Recessed Light (Wi-Fi/Zigbee) | $50 - $75 per fixture | Smart home enthusiasts, entertainment rooms, homes with existing smart ecosystemsFull color and white tuning, app and voice control, scenes and scheduling, no smart hub on some models |
Other Projects in Jacksonville
Jacksonville Estimate
Typical Range
$133-$266
vs. National Average
11% below national
Cost Multiplier
0.89x
Cost Per light
$133-$266
This 0.89x estimate prices Jacksonville labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →