Cost to Recessed Lighting Installation in Baltimore, MD (2026)
If you’re budgeting a recessed lighting installation in Baltimore, most projects run $158-$317, 6% above the $200 national average. What moves that number most is usually one thing: Number of Lights. On its own it can swing the cost by $100 - $300 per light, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Install all the lights in a room at once rather than adding one or two at a time - the per-light cost drops significantly
In the Northeast (where Baltimore sits): High electrician rates in the NYC, Boston, and DC corridors push costs 15-25% above average.
$158-$317 in Baltimore
6% above the national average · 1.06x cost multiplier
Expect to pay $158-$317 for a recessed lighting installation in Baltimore, about 6% above the national benchmark. The Northeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Baltimore prices.
Cost Breakdown in Baltimore
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per light | $158 | $211 | $317 |
| Materials | $381 | $654 | $1,090 |
| Labor | $407 | $713 | $1,120 |
| Permits | $0 | $109 | $163 |
| Total | $788+5% vs. national avg | $1,476+5% vs. national avg | $2,645+6% vs. national avg |
Budget
6 basic IC-rated LED can lights, new construction housings in accessible attic space, single switch, standard 5-6 inch cans
Mid-Range
8 slim LED recessed lights with adjustable color temperature, dimmer switch, remodel housings, baffled trims
Premium
10-12 architectural-grade LED fixtures, multiple dimming zones, smart controls, custom layout design, premium trims and finishes
Material Options
Material prices below are national averages; availability in Baltimore may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Standard IC-Rated LED Can Light | $15 - $25 per fixture | New construction, open ceilings, budget-focused projectsAffordable, widely available, IC rated for insulation contact, integrated LED saves on bulbs |
| Slim Profile LED (Canless) | $20 - $40 per fixture | Remodel projects, low-clearance ceilings, finished ceilings without attic accessNo housing required, fits in tight spaces, thinner profile, easy remodel installation |
| Adjustable Gimbal Light | $30 - $50 per fixture | Living rooms with artwork, kitchen task areas, accent lightingDirectional aiming for artwork or features, adjustable angle, modern look |
| Color-Tunable LED | $35 - $60 per fixture | Kitchens, home offices, spaces used at different times of daySwitch between warm and cool white, adapt to time of day or mood, single fixture does double duty |
| Smart Recessed Light (Wi-Fi/Zigbee) | $50 - $75 per fixture | Smart home enthusiasts, entertainment rooms, homes with existing smart ecosystemsFull color and white tuning, app and voice control, scenes and scheduling, no smart hub on some models |
Other Projects in Baltimore
Baltimore Estimate
Typical Range
$158-$317
vs. National Average
6% above national
Cost Multiplier
1.06x
Cost Per light
$158-$317
This 1.06x estimate prices Baltimore labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →