How much does a outlet & switch installation cost in Richmond?

A outlet & switch installation in Richmond typically costs $91-$408, 9% below the $220 national average.

What is the cost per per outlet or switch for a outlet & switch installation in Richmond?

Outlet & Switch Installation in Richmond typically costs $59-$227 per per outlet or switch.

How long does a outlet & switch installation take?

A outlet & switch installation typically takes 2-4 hours. The minimum timeline is 1-2 hours, and complex projects can run 1-2 days (new circuit runs).

Can I DIY a outlet & switch installation?

DIY feasibility for a outlet & switch installation is rated Partial.

Cost to Outlet & Switch Installation in Richmond, VA (2026)

If you’re budgeting a outlet & switch installation in Richmond, most projects run $91-$408, 9% below the $220 national average. What moves that number most is usually one thing: New circuit vs. existing circuit. On its own it can swing the cost by $200 - $500 additional, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Batch multiple outlets into a single electrician visit. The trip/service charge ($75-$150) is your biggest cost - spreading it across 5-6 outlets cuts effective cost per unit by 30-40%.

In the Southeast (where Richmond sits): Lower cost of living and labor rates reduce electrical costs by 8-15%.

$91-$408 in Richmond

9% below the national average · 0.91x cost multiplier

Homeowners in Richmond typically spend $91-$408 on a outlet & switch installation, about 9% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Richmond

Line Item	Low	Mid	High
Cost per per outlet or switch	$59	$136	$227
Materials	$14	$34	$82
Labor	$65	$105	$144
Permits	$0	$0	$72
Total	$79-12% vs. national avg	$139-10% vs. national avg	$298-8% vs. national avg

Budget

Basic duplex outlet swap on existing circuit - electrician replaces old outlet with new 15A or 20A standard outlet. No new wiring required.

Mid-Range

GFCI outlet or USB outlet installation in kitchen, bathroom, or garage. Includes tamper-resistant outlet, plate cover, and testing.

Premium

New smart outlet or USB-C outlet requiring new circuit run from panel, or adding outlet where none exists. Includes permit, drywall patching, and finish.

Material Options

Material prices below are national averages; availability in Richmond may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Standard 15A duplex outlet	$5-$15	Lowest cost, universal compatibility, easy to replace	No safety features, no USB charging	General living areas, bedrooms, low-use locationsLowest cost, universal compatibility, easy to replace
20A outlet	$8-$20	Higher capacity for appliances, required for kitchen and laundry circuits	Requires 20A circuit (12-gauge wire) - cannot install on 15A circuit	Kitchens, laundry rooms, garage workshopsHigher capacity for appliances, required for kitchen and laundry circuits
GFCI outlet	$20-$45	Code required near water, protects against shock, can protect downstream outlets	More expensive, trips occasionally with sensitive electronics	Bathrooms, kitchens, garages, outdoor locations, unfinished basementsCode required near water, protects against shock, can protect downstream outlets
USB combination outlet (USB-A/USB-C)	$30-$65	Built-in charging without adapters, fast-charge capable	USB ports become outdated as standards change, slightly more expensive	Bedrooms, home offices, nightstands, kitchensBuilt-in charging without adapters, fast-charge capable
Smart outlet (Wi-Fi or Z-Wave)	$40-$120	App/voice control, energy monitoring, scheduling, remote on/off	Requires stable Wi-Fi, needs setup and app, more expensive	Lamps, holiday lights, appliances you want to control remotelyApp/voice control, energy monitoring, scheduling, remote on/off
Tamper-resistant (TR) outlet	$8-$25	Child safety, NEC required in new construction and renovations	Slightly harder to insert plugs initially	Homes with children, all new outlet installationsChild safety, NEC required in new construction and renovations
Dimmer switch	$25-$80	Ambiance control, energy savings, extends bulb life	Must match bulb type (LED dimmers cost more), not compatible with all fixtures	Living rooms, dining rooms, bedrooms, hallwaysAmbiance control, energy savings, extends bulb life
Smart switch (Wi-Fi/Z-Wave)	$35-$90	Voice control, scheduling, can work with any bulb type, no app required for basic use	Requires neutral wire in most models, setup time	Overhead lighting you want voice or app control overVoice control, scheduling, can work with any bulb type, no app required for basic use

Other Projects in Richmond

Full Kitchen Remodel

Composite Deck Building

Full Bathroom Remodel

Back to national average for Outlet & Switch Installation

Richmond Estimate

Typical Range

$91-$408

vs. National Average

9% below national

Cost Multiplier

0.91x

Cost Per per outlet or switch

$59-$227

This 0.91x estimate prices Richmond labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →