How much does a outlet & switch installation cost in Philadelphia?

A outlet & switch installation in Philadelphia typically costs $113-$509, 13% above the $220 national average.

What is the cost per per outlet or switch for a outlet & switch installation in Philadelphia?

Outlet & Switch Installation in Philadelphia typically costs $74-$283 per per outlet or switch.

How long does a outlet & switch installation take?

A outlet & switch installation typically takes 2-4 hours. The minimum timeline is 1-2 hours, and complex projects can run 1-2 days (new circuit runs).

Can I DIY a outlet & switch installation?

DIY feasibility for a outlet & switch installation is rated Partial.

Cost to Outlet & Switch Installation in Philadelphia, PA (2026)

If you’re budgeting a outlet & switch installation in Philadelphia, most projects run $113-$509, 13% above the $220 national average. What moves that number most is usually one thing: New circuit vs. existing circuit. On its own it can swing the cost by $200 - $500 additional, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Batch multiple outlets into a single electrician visit. The trip/service charge ($75-$150) is your biggest cost - spreading it across 5-6 outlets cuts effective cost per unit by 30-40%.

In the Northeast (where Philadelphia sits): Higher electrician labor rates in Boston, NYC, and Philadelphia push costs up 15-25%.

$113-$509 in Philadelphia

13% above the national average · 1.13x cost multiplier

Expect to pay $113-$509 for a outlet & switch installation in Philadelphia, about 13% above the national benchmark. The Northeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Philadelphia prices.

Cost Breakdown in Philadelphia

Line Item	Low	Mid	High
Cost per per outlet or switch	$74	$170	$283
Materials	$17	$39	$94
Labor	$86	$137	$189
Permits	$0	$0	$83
Total	$103+14% vs. national avg	$176+14% vs. national avg	$366+13% vs. national avg

Budget

Basic duplex outlet swap on existing circuit - electrician replaces old outlet with new 15A or 20A standard outlet. No new wiring required.

Mid-Range

GFCI outlet or USB outlet installation in kitchen, bathroom, or garage. Includes tamper-resistant outlet, plate cover, and testing.

Premium

New smart outlet or USB-C outlet requiring new circuit run from panel, or adding outlet where none exists. Includes permit, drywall patching, and finish.

Material Options

Material prices below are national averages; availability in Philadelphia may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Standard 15A duplex outlet	$5-$15	Lowest cost, universal compatibility, easy to replace	No safety features, no USB charging	General living areas, bedrooms, low-use locationsLowest cost, universal compatibility, easy to replace
20A outlet	$8-$20	Higher capacity for appliances, required for kitchen and laundry circuits	Requires 20A circuit (12-gauge wire) - cannot install on 15A circuit	Kitchens, laundry rooms, garage workshopsHigher capacity for appliances, required for kitchen and laundry circuits
GFCI outlet	$20-$45	Code required near water, protects against shock, can protect downstream outlets	More expensive, trips occasionally with sensitive electronics	Bathrooms, kitchens, garages, outdoor locations, unfinished basementsCode required near water, protects against shock, can protect downstream outlets
USB combination outlet (USB-A/USB-C)	$30-$65	Built-in charging without adapters, fast-charge capable	USB ports become outdated as standards change, slightly more expensive	Bedrooms, home offices, nightstands, kitchensBuilt-in charging without adapters, fast-charge capable
Smart outlet (Wi-Fi or Z-Wave)	$40-$120	App/voice control, energy monitoring, scheduling, remote on/off	Requires stable Wi-Fi, needs setup and app, more expensive	Lamps, holiday lights, appliances you want to control remotelyApp/voice control, energy monitoring, scheduling, remote on/off
Tamper-resistant (TR) outlet	$8-$25	Child safety, NEC required in new construction and renovations	Slightly harder to insert plugs initially	Homes with children, all new outlet installationsChild safety, NEC required in new construction and renovations
Dimmer switch	$25-$80	Ambiance control, energy savings, extends bulb life	Must match bulb type (LED dimmers cost more), not compatible with all fixtures	Living rooms, dining rooms, bedrooms, hallwaysAmbiance control, energy savings, extends bulb life
Smart switch (Wi-Fi/Z-Wave)	$35-$90	Voice control, scheduling, can work with any bulb type, no app required for basic use	Requires neutral wire in most models, setup time	Overhead lighting you want voice or app control overVoice control, scheduling, can work with any bulb type, no app required for basic use

Other Projects in Philadelphia

Full Kitchen Remodel

Full Bathroom Remodel

Roof Replacement (Asphalt Shingles)

Back to national average for Outlet & Switch Installation

Philadelphia Estimate

Typical Range

$113-$509

vs. National Average

13% above national

Cost Multiplier

1.13x

Cost Per per outlet or switch

$74-$283

This 1.13x estimate prices Philadelphia labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →