Cost to Landscape Lighting in Richmond, VA (2026)
If you’re budgeting a landscape lighting in Richmond, most projects run $1,387-$6,011, 8% below the $3,200 national average. What moves that number most is usually one thing: Low-voltage vs. line-voltage systems. On its own it can swing the cost by $500 - $3,000 difference, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Start with a lower-wattage transformer than you think you need. You can always add a second transformer later at lower cost than replacing a transformer you sized wrong. Most 150W transformers handle 6-8 LED fixtures well.
In the Southeast (where Richmond sits): Lower labor costs and year-round installation season reduce overall costs.
$1,387-$6,011 in Richmond
8% below the national average · 0.92x cost multiplier
Homeowners in Richmond typically spend $1,387-$6,011 on a landscape lighting, about 8% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Richmond
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per per fixture installed | $60 | $185 | $370 |
| Materials | $338 | $1,158 | $3,378 |
| Labor | $349 | $1,221 | $2,617 |
| Permits | $0 | $0 | $193 |
| Total | $687-8% vs. national avg | $2,572-8% vs. national avg | $6,960-7% vs. national avg |
Budget
Basic DIY-grade low-voltage path light kit (8-12 solar or plug-in fixtures), single transformer, minimal wire run. No design, no trenching.
Mid-Range
Professional low-voltage system: 12-16 LED fixtures (path, uplights, spotlights), quality transformer with timer, wire burial, basic design consultation.
Premium
Full low-voltage or line-voltage architectural system: 20+ fixtures with uplighting, path lights, deck lights, and accent lighting. Zone control, professional design, underground conduit.
Material Options
Material prices below are national averages; availability in Richmond may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Solar path lights | $10-$40 per fixture | Temporary or accent use, renters, very sunny climatesNo wiring required, no electricity cost, easy to move |
| Low-voltage LED path lights | $20-$80 per fixture | Driveways, walkways, garden borders - the workhouse of most systemsReliable brightness, long lifespan (15-20+ years), low operating cost, huge variety |
| Low-voltage LED spotlights/uplights | $40-$120 per fixture | Trees, shrubs, architectural features, flagpolesDramatic uplighting of trees and architectural features, adjustable aim |
| In-ground well lights | $80-$200 per fixture | Driveways, patios, under trees where ground-mount lights would be tripped overFlush-mount for clean aesthetic, durable, works well in high-traffic areas |
| Deck and step lights | $25-$80 per fixture | Deck stairs, retaining wall steps, raised garden bedsSafety lighting for stairs and deck edges, integrated look |
| String lights (bistro/café style) | $20-$80 per 25-foot strand | Patios, pergolas, outdoor dining areasWarm ambiance, inexpensive per foot, easy to install |
Other Projects in Richmond
Richmond Estimate
Typical Range
$1,387-$6,011
vs. National Average
8% below national
Cost Multiplier
0.92x
Cost Per per fixture installed
$60-$370
This 0.92x estimate prices Richmond labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →