Cost to Home Security System Wiring Cost in 2026: What to Expect in Raleigh, NC

$1,620–$5,850 in Raleigh

10% below the national average · 0.90x cost multiplier

Homeowners in Raleigh typically spend $1,620–$5,850 on a home security system wiring cost in 2026: what to expect, about 10% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Raleigh

Line Item	Low	Mid	High
Cost per per zone	$135	$252	$405
Materials	$540	$1,350	$3,150
Labor	$720	$1,620	$2,700
Permits	$0	$0	$180
Total	$1,260-10% vs. national avg	$3,105-10% vs. national avg	$6,480-10% vs. national avg

Budget

Basic 4-6 zone wired system: door/window contacts on main entry points, one motion detector, hardwired keypad, basic control panel. No monitoring, no cameras.

Mid-Range

Full perimeter protection: 8-12 zones covering all doors, windows, glass break detectors, motion sensors, 2-zone smoke/CO integration, keypad with LCD display, battery backup.

Premium

Comprehensive system: 16+ zones, wired cameras (4+), glass break and motion on all floors, smart home integration, professional design, panel with cellular backup and UPS.

Material Options

Material prices below are national averages; availability in Raleigh may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Door/window contact sensors	$15-$45 per sensor	Simple, reliable, industry standard, easy to test	Only detects open/closed state, must cover all openings	All exterior doors and accessible windows (standard practice)Simple, reliable, industry standard, easy to test
Passive infrared (PIR) motion detectors	$30-$90 per sensor	Covers large areas with one device, catches motion regardless of door/window state	Can false-alarm from pets, HVAC drafts, or direct sunlight	Open-plan living areas, hallways, stairways - interior perimetersCovers large areas with one device, catches motion regardless of door/window state
Glass break detectors	$40-$100 per sensor	Detects window breaking without needing sensors on every window pane	Range is 15-25 feet, can false-alarm from similar sounds	Large window walls, picture windows, sliding glass doorsDetects window breaking without needing sensors on every window pane
Wired IP cameras (PoE)	$80-$300 per camera	High resolution, no battery, stable connection, can tie into security panel	Requires Cat5e/Cat6 run to each camera, NVR hardware adds $200-$800	Driveways, front entry, back yard, garageHigh resolution, no battery, stable connection, can tie into security panel
Control panel (DSC, Honeywell, Elk)	$150-$600 per panel	Robust, expandable, monitoring company compatible, battery backup built-in	Requires programming, professional monitoring typically required for full features	Whole-home wired systems where reliability is the priorityRobust, expandable, monitoring company compatible, battery backup built-in
Wireless hybrid panel (Qolsys, 2GIG)	$200-$500 per panel	Supports both wired and wireless sensors, easier expansion, built-in cellular	More expensive, wireless sensors need battery replacement	Existing homes where running wire everywhere isn't practicalSupports both wired and wireless sensors, easier expansion, built-in cellular

Other Projects in Raleigh

Full Kitchen Remodel

Full Bathroom Remodel

Composite Deck Building

Back to national average for Home Security System Wiring Cost in 2026: What to Expect

Raleigh Estimate

Typical Range

$1,620–$5,850

vs. National Average

10% below national

Cost Multiplier

0.90x

Cost Per per zone

$135–$405

Estimates apply Raleigh's 0.90x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →