Cost to Home Security System Wiring in Los Angeles, CA (2026)
If you’re budgeting a home security system wiring in Los Angeles, most projects run $2,095-$7,566, 16% above the $3,500 national average. What moves that number most is usually one thing: Number of zones. On its own it can swing the cost by $150 - $450 per additional zone, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Pre-wire during new construction or major renovation. Running security wire during framing costs $300-$600 for a whole house vs. $1,500-$3,000 retrofitting through finished walls. If you're already opening walls, add security rough-in.
In the West Coast (where Los Angeles sits): California contractor rates among the highest nationally; licensing requirements add to overhead.
$2,095-$7,566 in Los Angeles
16% above the national average · 1.16x cost multiplier
In Los Angeles, a home security system wiring runs $2,095 to $7,566 on average - about 16% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Los Angeles
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per per zone | $175 | $326 | $524 |
| Materials | $705 | $1,763 | $4,113 |
| Labor | $921 | $2,072 | $3,454 |
| Permits | $0 | $0 | $235 |
| Total | $1,626+16% vs. national avg | $4,011+16% vs. national avg | $8,390+17% vs. national avg |
Budget
Basic 4-6 zone wired system: door/window contacts on main entry points, one motion detector, hardwired keypad, basic control panel. No monitoring, no cameras.
Mid-Range
Full perimeter protection: 8-12 zones covering all doors, windows, glass break detectors, motion sensors, 2-zone smoke/CO integration, keypad with LCD display, battery backup.
Premium
Comprehensive system: 16+ zones, wired cameras (4+), glass break and motion on all floors, smart home integration, professional design, panel with cellular backup and UPS.
Material Options
Material prices below are national averages; availability in Los Angeles may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Door/window contact sensors | $15-$45 per sensor | All exterior doors and accessible windows (standard practice)Simple, reliable, industry standard, easy to test |
| Passive infrared (PIR) motion detectors | $30-$90 per sensor | Open-plan living areas, hallways, stairways - interior perimetersCovers large areas with one device, catches motion regardless of door/window state |
| Glass break detectors | $40-$100 per sensor | Large window walls, picture windows, sliding glass doorsDetects window breaking without needing sensors on every window pane |
| Wired IP cameras (PoE) | $80-$300 per camera | Driveways, front entry, back yard, garageHigh resolution, no battery, stable connection, can tie into security panel |
| Control panel (DSC, Honeywell, Elk) | $150-$600 per panel | Whole-home wired systems where reliability is the priorityRobust, expandable, monitoring company compatible, battery backup built-in |
| Wireless hybrid panel (Qolsys, 2GIG) | $200-$500 per panel | Existing homes where running wire everywhere isn't practicalSupports both wired and wireless sensors, easier expansion, built-in cellular |
Other Projects in Los Angeles
Los Angeles Estimate
Typical Range
$2,095-$7,566
vs. National Average
16% above national
Cost Multiplier
1.16x
Cost Per per zone
$175-$524
This 1.16x estimate prices Los Angeles labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →