Cost to Home Security System Wiring Cost in 2026: What to Expect in Jacksonville, FL

$1,638–$5,915 in Jacksonville

9% below the national average · 0.91x cost multiplier

In Jacksonville, a home security system wiring cost in 2026: what to expect runs $1,638 to $5,915 on average — about 9% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Jacksonville

Line Item	Low	Mid	High
Cost per per zone	$137	$255	$410
Materials	$546	$1,365	$3,185
Labor	$728	$1,638	$2,730
Permits	$0	$0	$182
Total	$1,274-9% vs. national avg	$3,140-9% vs. national avg	$6,552-9% vs. national avg

Budget

Basic 4-6 zone wired system: door/window contacts on main entry points, one motion detector, hardwired keypad, basic control panel. No monitoring, no cameras.

Mid-Range

Full perimeter protection: 8-12 zones covering all doors, windows, glass break detectors, motion sensors, 2-zone smoke/CO integration, keypad with LCD display, battery backup.

Premium

Comprehensive system: 16+ zones, wired cameras (4+), glass break and motion on all floors, smart home integration, professional design, panel with cellular backup and UPS.

Material Options

Material prices below are national averages; availability in Jacksonville may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Door/window contact sensors	$15-$45 per sensor	Simple, reliable, industry standard, easy to test	Only detects open/closed state, must cover all openings	All exterior doors and accessible windows (standard practice)Simple, reliable, industry standard, easy to test
Passive infrared (PIR) motion detectors	$30-$90 per sensor	Covers large areas with one device, catches motion regardless of door/window state	Can false-alarm from pets, HVAC drafts, or direct sunlight	Open-plan living areas, hallways, stairways - interior perimetersCovers large areas with one device, catches motion regardless of door/window state
Glass break detectors	$40-$100 per sensor	Detects window breaking without needing sensors on every window pane	Range is 15-25 feet, can false-alarm from similar sounds	Large window walls, picture windows, sliding glass doorsDetects window breaking without needing sensors on every window pane
Wired IP cameras (PoE)	$80-$300 per camera	High resolution, no battery, stable connection, can tie into security panel	Requires Cat5e/Cat6 run to each camera, NVR hardware adds $200-$800	Driveways, front entry, back yard, garageHigh resolution, no battery, stable connection, can tie into security panel
Control panel (DSC, Honeywell, Elk)	$150-$600 per panel	Robust, expandable, monitoring company compatible, battery backup built-in	Requires programming, professional monitoring typically required for full features	Whole-home wired systems where reliability is the priorityRobust, expandable, monitoring company compatible, battery backup built-in
Wireless hybrid panel (Qolsys, 2GIG)	$200-$500 per panel	Supports both wired and wireless sensors, easier expansion, built-in cellular	More expensive, wireless sensors need battery replacement	Existing homes where running wire everywhere isn't practicalSupports both wired and wireless sensors, easier expansion, built-in cellular

Other Projects in Jacksonville

Roof Replacement (Asphalt Shingles)

Full Bathroom Remodel

Back to national average for Home Security System Wiring Cost in 2026: What to Expect

Jacksonville Estimate

Typical Range

$1,638–$5,915

vs. National Average

9% below national

Cost Multiplier

0.91x

Cost Per per zone

$137–$410

Estimates apply Jacksonville's 0.91x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →