Cost to Home Security System Wiring in Dallas, TX (2026)
If you’re budgeting a home security system wiring in Dallas, most projects run $1,631-$5,891, 9% below the $3,500 national average. What moves that number most is usually one thing: Number of zones. On its own it can swing the cost by $150 - $450 per additional zone, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Pre-wire during new construction or major renovation. Running security wire during framing costs $300-$600 for a whole house vs. $1,500-$3,000 retrofitting through finished walls. If you're already opening walls, add security rough-in.
In the Southeast (where Dallas sits): Lower labor costs; strong market for security systems keeps competition high.
$1,631-$5,891 in Dallas
9% below the national average · 0.91x cost multiplier
In Dallas, a home security system wiring runs $1,631 to $5,891 on average - about 9% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Dallas
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per per zone | $136 | $254 | $408 |
| Materials | $579 | $1,448 | $3,378 |
| Labor | $671 | $1,510 | $2,516 |
| Permits | $0 | $0 | $193 |
| Total | $1,250-11% vs. national avg | $3,103-10% vs. national avg | $6,570-9% vs. national avg |
Budget
Basic 4-6 zone wired system: door/window contacts on main entry points, one motion detector, hardwired keypad, basic control panel. No monitoring, no cameras.
Mid-Range
Full perimeter protection: 8-12 zones covering all doors, windows, glass break detectors, motion sensors, 2-zone smoke/CO integration, keypad with LCD display, battery backup.
Premium
Comprehensive system: 16+ zones, wired cameras (4+), glass break and motion on all floors, smart home integration, professional design, panel with cellular backup and UPS.
Material Options
Material prices below are national averages; availability in Dallas may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Door/window contact sensors | $15-$45 per sensor | All exterior doors and accessible windows (standard practice)Simple, reliable, industry standard, easy to test |
| Passive infrared (PIR) motion detectors | $30-$90 per sensor | Open-plan living areas, hallways, stairways - interior perimetersCovers large areas with one device, catches motion regardless of door/window state |
| Glass break detectors | $40-$100 per sensor | Large window walls, picture windows, sliding glass doorsDetects window breaking without needing sensors on every window pane |
| Wired IP cameras (PoE) | $80-$300 per camera | Driveways, front entry, back yard, garageHigh resolution, no battery, stable connection, can tie into security panel |
| Control panel (DSC, Honeywell, Elk) | $150-$600 per panel | Whole-home wired systems where reliability is the priorityRobust, expandable, monitoring company compatible, battery backup built-in |
| Wireless hybrid panel (Qolsys, 2GIG) | $200-$500 per panel | Existing homes where running wire everywhere isn't practicalSupports both wired and wireless sensors, easier expansion, built-in cellular |
Other Projects in Dallas
Dallas Estimate
Typical Range
$1,631-$5,891
vs. National Average
9% below national
Cost Multiplier
0.91x
Cost Per per zone
$136-$408
This 0.91x estimate prices Dallas labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →