Cost to Home Security System Wiring in Baltimore, MD (2026)
If you’re budgeting a home security system wiring in Baltimore, most projects run $1,902-$6,869, 6% above the $3,500 national average. What moves that number most is usually one thing: Number of zones. On its own it can swing the cost by $150 - $450 per additional zone, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Pre-wire during new construction or major renovation. Running security wire during framing costs $300-$600 for a whole house vs. $1,500-$3,000 retrofitting through finished walls. If you're already opening walls, add security rough-in.
In the Northeast (where Baltimore sits): Higher low-voltage technician labor rates in major metro areas.
$1,902-$6,869 in Baltimore
6% above the national average · 1.06x cost multiplier
Expect to pay $1,902-$6,869 for a home security system wiring in Baltimore, about 6% above the national benchmark. The Northeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Baltimore prices.
Cost Breakdown in Baltimore
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per per zone | $159 | $296 | $476 |
| Materials | $654 | $1,635 | $3,815 |
| Labor | $815 | $1,833 | $3,055 |
| Permits | $0 | $0 | $218 |
| Total | $1,469+5% vs. national avg | $3,631+5% vs. national avg | $7,633+6% vs. national avg |
Budget
Basic 4-6 zone wired system: door/window contacts on main entry points, one motion detector, hardwired keypad, basic control panel. No monitoring, no cameras.
Mid-Range
Full perimeter protection: 8-12 zones covering all doors, windows, glass break detectors, motion sensors, 2-zone smoke/CO integration, keypad with LCD display, battery backup.
Premium
Comprehensive system: 16+ zones, wired cameras (4+), glass break and motion on all floors, smart home integration, professional design, panel with cellular backup and UPS.
Material Options
Material prices below are national averages; availability in Baltimore may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Door/window contact sensors | $15-$45 per sensor | All exterior doors and accessible windows (standard practice)Simple, reliable, industry standard, easy to test |
| Passive infrared (PIR) motion detectors | $30-$90 per sensor | Open-plan living areas, hallways, stairways - interior perimetersCovers large areas with one device, catches motion regardless of door/window state |
| Glass break detectors | $40-$100 per sensor | Large window walls, picture windows, sliding glass doorsDetects window breaking without needing sensors on every window pane |
| Wired IP cameras (PoE) | $80-$300 per camera | Driveways, front entry, back yard, garageHigh resolution, no battery, stable connection, can tie into security panel |
| Control panel (DSC, Honeywell, Elk) | $150-$600 per panel | Whole-home wired systems where reliability is the priorityRobust, expandable, monitoring company compatible, battery backup built-in |
| Wireless hybrid panel (Qolsys, 2GIG) | $200-$500 per panel | Existing homes where running wire everywhere isn't practicalSupports both wired and wireless sensors, easier expansion, built-in cellular |
Other Projects in Baltimore
Baltimore Estimate
Typical Range
$1,902-$6,869
vs. National Average
6% above national
Cost Multiplier
1.06x
Cost Per per zone
$159-$476
This 1.06x estimate prices Baltimore labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →