How much does a bathroom exhaust fan wiring cost in Denver?

A bathroom exhaust fan wiring in Denver typically costs $245-$636, 2% below the $400 national average.

How long does a bathroom exhaust fan wiring take?

A bathroom exhaust fan wiring typically takes 2-4 hours. The minimum timeline is 1 hour, and complex projects can run 1 day.

Can I DIY a bathroom exhaust fan wiring?

DIY feasibility for a bathroom exhaust fan wiring is rated Difficult.

Cost to Bathroom Exhaust Fan Wiring in Denver, CO (2026)

If you’re budgeting a bathroom exhaust fan wiring in Denver, most projects run $245-$636, 2% below the $400 national average. What moves that number most is usually one thing: New Circuit vs. Existing Circuit. On its own it can swing the cost by $100 - $400, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Connect the fan to the existing light switch circuit (if code allows) instead of running a new circuit - saves $150-$300

In the Mountain West (where Denver sits): Moderate rates, less humidity demand.

$245-$636 in Denver

2% below the national average · 0.98x cost multiplier

Expect to pay $245-$636 for a bathroom exhaust fan wiring in Denver, about 2% below the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Denver prices.

Cost Breakdown in Denver

Line Item	Low	Mid	High
Materials	$42	$85	$159
Labor	$142	$284	$473
Permits	$0	$53	$80
Total	$184-3% vs. national avg	$422-2% vs. national avg	$712-2% vs. national avg

Budget

Wiring a new fan to an existing switch circuit with a short wire run through accessible attic space

Mid-Range

New dedicated circuit from panel with separate switch for fan, running through walls/attic, timer switch included

Premium

Dedicated circuit with humidity-sensing switch, GFCI protection, wiring through finished ceilings, and fan/light combo with separate controls

Material Options

Material prices below are national averages; availability in Denver may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
14/2 NM-B Wire (Standard)	$0.50-$0.80/ft	Standard for 15-amp fan circuits, widely available, easy to work with	Not suitable for heater combos that draw more than 15 amps	Basic exhaust fan on a 15-amp circuitStandard for 15-amp fan circuits, widely available, easy to work with
14/3 NM-B Wire (Fan + Light)	$0.70-$1.10/ft	Allows separate switching of fan and light from one cable run	Slightly more expensive and harder to pull through tight spaces	Fan/light combo units with separate wall switchesAllows separate switching of fan and light from one cable run
Timer Switch	$25-$50	Ensures fan runs long enough to remove moisture, auto-off prevents wasted energy	Must remember to turn on manually, requires neutral wire	Best overall switch choice for most bathroom exhaust fansEnsures fan runs long enough to remove moisture, auto-off prevents wasted energy
Humidity-Sensing Switch	$40-$100	Fully automatic, turns on with shower steam and off when humidity drops, set-and-forget	Higher cost, may cycle on during other humidity events, requires neutral wire	Bathrooms where family members forget to use the fanFully automatic, turns on with shower steam and off when humidity drops, set-and-forget

Other Projects in Denver

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Bathroom Exhaust Fan Wiring

Denver Estimate

Typical Range

$245-$636

vs. National Average

2% below national

Cost Multiplier

0.98x

This 0.98x estimate prices Denver labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →