How much does a tile shower pan repair cost in Tampa?

A tile shower pan repair in Tampa typically costs $253-$2,107, 16% below the $850 national average.

What is the cost per sq ft for a tile shower pan repair in Tampa?

Tile Shower Pan Repair in Tampa typically costs $13-$38 per sq ft.

How long does a tile shower pan repair take?

A tile shower pan repair typically takes 3-7 days. The minimum timeline is 1 day, and complex projects can run 2 weeks.

Can I DIY a tile shower pan repair?

DIY feasibility for a tile shower pan repair is rated Limited.

Cost to Tile Shower Pan Repair in Tampa, FL (2026)

If you’re budgeting a tile shower pan repair in Tampa, most projects run $253-$2,107, 16% below the $850 national average. What moves that number most is usually one thing: Repair vs. Full Replacement. On its own it can swing the cost by $150 - $5,000, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Before calling a contractor, tap every tile on the shower floor with a coin - hollow-sounding tiles signal a failed bond and will need replacement whether or not they look cracked

In the Southeast (where Tampa sits): Lower labor costs throughout; Florida Gulf Coast markets run closer to national average.

$253-$2,107 in Tampa

16% below the national average · 0.84x cost multiplier

Homeowners in Tampa typically spend $253-$2,107 on a tile shower pan repair, about 16% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Tampa

Line Item	Low	Mid	High
Cost per sq ft	$13	$25	$38
Materials	$73	$340	$1,164
Labor	$135	$578	$1,695
Permits	$0	$0	$146
Total	$208-17% vs. national avg	$918-17% vs. national avg	$3,005-15% vs. national avg

Budget

Grout repointing, caulk replacement at pan perimeter, and resealing. Addresses minor water intrusion at joints without replacing tile or liner.

Mid-Range

Replace cracked or stained tiles, repair or patch the waterproof liner, and re-grout affected area. Typical for a 16-25 sq ft shower pan with localized damage.

Premium

Full shower pan tear-out and replacement with custom tile on a mortar bed, new waterproof membrane, and matching field tile. Required when the liner has failed completely or subfloor damage is found.

Material Options

Material prices below are national averages; availability in Tampa may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Prefab Fiberglass or Acrylic Pan	$200-$600 per unit	Lowest material cost, no liner or mortar bed needed, installs quickly	Requires removing surrounding wall tile to swap in, limited size options, can flex and crack over time	Budget replacements in standard 32x32 or 36x36 alcove showersLowest material cost, no liner or mortar bed needed, installs quickly
PVC or CPE Tile-Over-Liner	$80-$200 per liner sheet	Flexible and durable, industry standard for custom tile installations, fully waterproof when properly dressed at corners	Must be installed over a properly sloped mortar bed, liner punctures are a common installer error	Custom tile shower floors in new or full-replacement workFlexible and durable, industry standard for custom tile installations, fully waterproof when properly dressed at corners
Hot-Mop Shower Pan	$250-$500 for the hot-mop service	Seamless waterproof layer, long track record in California and Southwest markets, sets in hours	Requires a specialist - not available in all markets, must cure before tiling	Full pan replacements in markets where hot-mop contractors are availableSeamless waterproof layer, long track record in California and Southwest markets, sets in hours
Sheet Membrane (Schluter Kerdi, Wedi)	$3-$8 per sq ft for membrane	Bonds directly to substrate, no mortar bed needed, faster install than liner systems	Higher material cost, requires compatible tile-setting materials, seams must be taped properly	Renovations where minimizing floor buildup height mattersBonds directly to substrate, no mortar bed needed, faster install than liner systems
Prefab Tile Kit (e.g., Schluter Shower System)	$500-$1,200 per kit	All components engineered to work together, eliminates liner failure risk, tile-ready surface included	Highest upfront material cost, requires installers familiar with the system	Full replacements where reliability and warranty matter more than upfront costAll components engineered to work together, eliminates liner failure risk, tile-ready surface included

Other Projects in Tampa

Roof Replacement (Asphalt Shingles)

Central AC Installation

Vinyl Siding Replacement

Back to national average for Tile Shower Pan Repair

Tampa Estimate

Typical Range

$253-$2,107

vs. National Average

16% below national

Cost Multiplier

0.84x

Cost Per sq ft

$13-$38

This 0.84x estimate prices Tampa labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →