Cost to Tile Shower Pan Repair in New Orleans, LA

$264–$2,200 in New Orleans

12% below the national average · 0.88x cost multiplier

Homeowners in New Orleans typically spend $264–$2,200 on a tile shower pan repair, about 12% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in New Orleans

Line Item	Low	Mid	High
Cost per sq ft	$13	$26	$40
Materials	$66	$308	$1,056
Labor	$154	$660	$1,936
Permits	$0	$0	$132
Total	$220-12% vs. national avg	$968-12% vs. national avg	$3,124-12% vs. national avg

Budget

Grout repointing, caulk replacement at pan perimeter, and resealing. Addresses minor water intrusion at joints without replacing tile or liner.

Mid-Range

Replace cracked or stained tiles, repair or patch the waterproof liner, and re-grout affected area. Typical for a 16-25 sq ft shower pan with localized damage.

Premium

Full shower pan tear-out and replacement with custom tile on a mortar bed, new waterproof membrane, and matching field tile. Required when the liner has failed completely or subfloor damage is found.

Material Options

Material prices below are national averages; availability in New Orleans may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Prefab Fiberglass or Acrylic Pan	$200-$600 per unit	Lowest material cost, no liner or mortar bed needed, installs quickly	Requires removing surrounding wall tile to swap in, limited size options, can flex and crack over time	Budget replacements in standard 32x32 or 36x36 alcove showersLowest material cost, no liner or mortar bed needed, installs quickly
PVC or CPE Tile-Over-Liner	$80-$200 per liner sheet	Flexible and durable, industry standard for custom tile installations, fully waterproof when properly dressed at corners	Must be installed over a properly sloped mortar bed, liner punctures are a common installer error	Custom tile shower floors in new or full-replacement workFlexible and durable, industry standard for custom tile installations, fully waterproof when properly dressed at corners
Hot-Mop Shower Pan	$250-$500 for the hot-mop service	Seamless waterproof layer, long track record in California and Southwest markets, sets in hours	Requires a specialist - not available in all markets, must cure before tiling	Full pan replacements in markets where hot-mop contractors are availableSeamless waterproof layer, long track record in California and Southwest markets, sets in hours
Sheet Membrane (Schluter Kerdi, Wedi)	$3-$8 per sq ft for membrane	Bonds directly to substrate, no mortar bed needed, faster install than liner systems	Higher material cost, requires compatible tile-setting materials, seams must be taped properly	Renovations where minimizing floor buildup height mattersBonds directly to substrate, no mortar bed needed, faster install than liner systems
Prefab Tile Kit (e.g., Schluter Shower System)	$500-$1,200 per kit	All components engineered to work together, eliminates liner failure risk, tile-ready surface included	Highest upfront material cost, requires installers familiar with the system	Full replacements where reliability and warranty matter more than upfront costAll components engineered to work together, eliminates liner failure risk, tile-ready surface included

Other Projects in New Orleans

Roof Replacement (Asphalt Shingles)

Full Bathroom Remodel

Full Kitchen Remodel

Back to national average for Tile Shower Pan Repair

New Orleans Estimate

Typical Range

$264–$2,200

vs. National Average

12% below national

Cost Multiplier

0.88x

Cost Per sq ft

$13–$40

Estimates apply New Orleans's 0.88x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →