Cost to Tile Shower Pan Repair in Miami, FL (2026)
If you’re budgeting a tile shower pan repair in Miami, most projects run $266-$2,219, 11% below the $850 national average. What moves that number most is usually one thing: Repair vs. Full Replacement. On its own it can swing the cost by $150 - $5,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Before calling a contractor, tap every tile on the shower floor with a coin - hollow-sounding tiles signal a failed bond and will need replacement whether or not they look cracked
In the Southeast (where Miami sits): Lower labor costs throughout; Florida Gulf Coast markets run closer to national average.
$266-$2,219 in Miami
11% below the national average · 0.89x cost multiplier
Homeowners in Miami typically spend $266-$2,219 on a tile shower pan repair, about 11% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Miami
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $13 | $27 | $40 |
| Materials | $78 | $364 | $1,248 |
| Labor | $140 | $601 | $1,763 |
| Permits | $0 | $0 | $156 |
| Total | $218-13% vs. national avg | $965-12% vs. national avg | $3,167-11% vs. national avg |
Budget
Grout repointing, caulk replacement at pan perimeter, and resealing. Addresses minor water intrusion at joints without replacing tile or liner.
Mid-Range
Replace cracked or stained tiles, repair or patch the waterproof liner, and re-grout affected area. Typical for a 16-25 sq ft shower pan with localized damage.
Premium
Full shower pan tear-out and replacement with custom tile on a mortar bed, new waterproof membrane, and matching field tile. Required when the liner has failed completely or subfloor damage is found.
Material Options
Material prices below are national averages; availability in Miami may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Prefab Fiberglass or Acrylic Pan | $200-$600 per unit | Budget replacements in standard 32x32 or 36x36 alcove showersLowest material cost, no liner or mortar bed needed, installs quickly |
| PVC or CPE Tile-Over-Liner | $80-$200 per liner sheet | Custom tile shower floors in new or full-replacement workFlexible and durable, industry standard for custom tile installations, fully waterproof when properly dressed at corners |
| Hot-Mop Shower Pan | $250-$500 for the hot-mop service | Full pan replacements in markets where hot-mop contractors are availableSeamless waterproof layer, long track record in California and Southwest markets, sets in hours |
| Sheet Membrane (Schluter Kerdi, Wedi) | $3-$8 per sq ft for membrane | Renovations where minimizing floor buildup height mattersBonds directly to substrate, no mortar bed needed, faster install than liner systems |
| Prefab Tile Kit (e.g., Schluter Shower System) | $500-$1,200 per kit | Full replacements where reliability and warranty matter more than upfront costAll components engineered to work together, eliminates liner failure risk, tile-ready surface included |
Other Projects in Miami
Miami Estimate
Typical Range
$266-$2,219
vs. National Average
11% below national
Cost Multiplier
0.89x
Cost Per sq ft
$13-$40
This 0.89x estimate prices Miami labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →